ANALISIS PERENCANAAN PERSEDIAAN BATUBARA FX DENGAN METODE MATERIAL REQUIREMENT PLANNING

Muhammad Arief(1*), Supriyadi Supriyadi(2),


(1) Program Studi Teknik Industri, Universitas Serang Raya, Jalan Raya Serang, Cilegon KM. 5 Taman Drangong Kota Serang, Banten 42116, Indonesia
(2) 
(*) Corresponding Author

Abstract


A company often has difficulty in controlling raw materials,it could be surplus or minus. Preventing these problem,we made a problem solving. Material needs planning is made for efficient and effective materials application  in the execution of work, so the problems because of material is avoided.this  research purpose is planning  and controlling raw material and supplier selection by Material Requirement Planning (MRP) method. Material Requirement Planning is a method for determining materials or components which  make or buy, how much it is needed and when it is needed. The result using the calculation by MRP method show Fix Period Requirement (FPR) is the best method, because the calculation of Fix Period Requirement method got the lowest total cost that is  Rp.18,722,190,090, -.FPR is obtained a profit about Rp. 6.096.088.915,00 or about 25% more efficient than the method applied company.


Keywords


Fix Period Requirement, Material Requirement Planning, Planning

Full Text:

PDF

References


Greasley, A. (2008). Operations Management. Thousand Oaks: SAGE Publications Inc.

Milne, R. J., Mahapatra, S., & Wang, C. T. (2015). Optimizing Planned Lead Times for Enhancing Performance of MRP Systems. International Journal of Production Economics, 167(1), 220–231.

Irawan, P. A., & Syaicu, A. (2017). Pengendalian Persediaan Bahan Baku Dengan Metode Material Requirement Planning (MRP) Pada PT. Semen Indonesia (Persero), Tbk. Journal Knowledge Industrial Engineering, 4(1), 15–22.

Putri, P. A. V., Santoso, P. B., & Sari, R. A. (2014). Perencanaan Persediaan Bahan Baku Herbisida Menggunakan Metode Silver Meal Dengan Memperhatikan Kapasitas Gudang (Studi Kasus di PT X, Gresik). Jurnal Rekayasa Dan Manajemen Sistem Industri, 2(2), 418-427.

Wibowo, H., & Nurbahri, H. (2017). Analisa Perencanaan Kebutuhan Bahan Dengan Kriteria Minimasi Biaya Persediaan Bahan Baku Pada PT. Fajar Utama Furnishing Bekasi. Spektrum Industri, 15(1), 27–36.

Supriyadi, S., & Riskiyadi, R. (2016). Penjadwalan Produksi IKS-Filler Pada Proses Ground Calcium Carbonate Menggunakan Metode MPS Di Perusahaan Kertas. Jurnal Ilmiah SINERGI, 20(2), 157–164.

Haming, M., & Nurnajamuddinn, M. (2014). Manajemen Produksi Modern: Operasi Manufaktur dan Jasa. Jakarta: PT. Bumi Aksara.

Ullah, H., & Parveen, S. (2010). A Literature Review on Inventory Lot Sizing. Global Journal of Researches in Engineering, 10(5), 21–36.

Rahmayanti, D., & Fauzan, A. (2016). Optimalisasi Sistem Persediaan Bahan Baku Karet Mentah Lateks) Dengan Metode Lot Sizing (Studi Kasus: PT Abaisiat Raya). Jurnal Optimasi Sistem Industri, 12(1), 317–325.

Yasra, R., Cundara, N., & Widodo, B. W. (2014). Analisa Penjadwalan Persediaan Timbangan Model SM 5600 Dengan Metode Lot for Lot (Studi Kasus di PT. Tropical Electronic Batam). PROFISIENSI, 2(2), 122–31.




DOI: https://doi.org/10.30988/jmil.v1i2.13

Article Metrics

Abstract view : 35 times
PDF - 23 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik



 
 

View My Stats

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


ISSN 2622-528X (Print) and ISSN 2598-5795 (Online)

CORRESPONDENCE :

Unit Penelitian dan Pengabdian Masyarakat (UPPM)
Politeknik APP Jakarta
Kementerian Perindustrian
M. Tirtana Siregar
Managing Editor Jurnal Manajemen Industri dan Logistik
Telp. : 021-7867382/83
HP/WA : 082125910310
email :
jurnal@poltekapp.ac.id
uppm.politeknikapp@gmail.com