ANALISIS PENGENDALIAN KUALITAS TERJADINYA CACAT PADA PROSES PRODUKSI ADJUSTER R KWB (Studi Kasus di PT. Dina Karya Pratama. (Cicadas-Bogor)

Indrani Dharmayanti(1*), Ajeng Rahayu(2),


(1) Program Studi Manajemen Produksi, Politeknik APP Jakarta
(2) Program Studi Perdagangan Internasional, , Politeknik APP Jakarta
(*) Corresponding Author

Abstract


This study aims to find out the production process of Adjuster R KWB (a part of automotive sparepart),  the defect analysis and causes in PT. Dina Karya Pratama. It is a manufacturing company engaged in metal industry, especially automotive,. Quality control analysis is done using statistical called seven tools consisting of check sheet, p control chart, pareto diagram, and cause  and effect diagram to answer those problems.  The results of analysis show that the production process is controlled by the average proportion of defects (0.0071283). The level of disability is dominated by screw jam (50%) and circle not symmetry (35%). The main factors causing the defect are the engine factor that has not been hot, the method factor and the inaccuracy of labor.

Keywords


Quality Control, Statistical Quality Control (SQC), Seven Tools

Full Text:

PDF

References


. Irwan dan Haryono. 2015. Pengendalian Kualitas Statistik. Edisi Pertama. IKAPI. Alfabeta Bandung

. Gasprez, Vincent. 2007. Total Quality Management. Jakarta : PT. Gramedia

. Handoko. Tani. 2007. Dasar-Dasar Manajemen Produksi dan Operasi. Yogyakarta : BPFE Jakarta. LPFE-UI

. Elmas, Muhammad Syarif Hidayatullah 2017. Pengendalian Kualitas Dengan Menggunakan Metode Statistical Quality Control untuk Meminimumkan Produk Gagal Pada Toko Roti Barokah Bakery. Diakses 24 Juli 2017. (https://www.google.com/url?sa=t&source=web&rct=j&url=https://media.neliti.com/media/publications/164404-ID-none.pdf&ved=2ahUKEwiHyYnP8YzbAhUCU7wKHXEQDjgQFjAAegQICRAB&usg=AOvVaw2M6yYgVQF52EqL7OfVIBF7)

. Yunita, Eva. 2017. Analisis penen dalian Produk Dengan Metode Six Sigma Pada PT. Mahakam Media Grafik Di Balikpapan Diakses 24 Juli 2017. (https://www.google.com/url?sa=t&source=web&rct=j&url=http://ejournal.adbisnis.fisip-unmul.ac.id/site/wp-content/uploads/2017/11/jurnal%2520eva%2520yuvita%2520(11-08-17-12-39-33). pdf&ved=2ahUKEwiHyYnP8YzbAhUCU7wKHXEQDjgQFjABegQIBxAB&usg=AOvVaw0xa0e6QWnhC8im69Q7WBvm)

. Trysha, Zulfidrica. (2017), Analisis Pengendalian Kualitas Produksi Fotokopi pada CV.Surya Jaya Mandiri di Samarinda, eJournal Administrasi Bisnis, 2017, 5 (3): 690-704. Diakses 24 Juli 2017. https://www.google.com /url?sa=t&source=web&rct=j&url=http://ejournal.adbisnis.fisip-unmul.ac.id/site/wp-content/uploads/2017/08/New%2520Jurnal%2520Trysha%2520(08-22-17-07-13-54).doc&ved=2ahUKEwiVrvKA-ozbAhULwLwKHTsMBgYQFjAAegQIABAB&usg=AOvVaw3zoHGfnvBMW65xiGPpJl0t

. Hatani, La. 2008. Manajemen Pengendalian Mutu Produksi Roti Melalui Pendekatan Statistical Quality Control (SQC), (online), (http://118.97.35.230/library/dinding.php?module=viewdetails&id=25, diakses 24 juli 2017, dari e-library Unhalu)




DOI: https://doi.org/10.30988/jmil.v2i1.26

Article Metrics

Abstract view : 21 times
PDF - 12 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik



 
 

View My Stats

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


ISSN 2622-528X (Print) and ISSN 2598-5795 (Online)

CORRESPONDENCE :

Unit Penelitian dan Pengabdian Masyarakat (UPPM)
Politeknik APP Jakarta
Kementerian Perindustrian
M. Tirtana Siregar
Managing Editor Jurnal Manajemen Industri dan Logistik
Telp. : 021-7867382/83
HP/WA : 082125910310
email :
jurnal@poltekapp.ac.id
uppm.politeknikapp@gmail.com