KEBIJAKAN PERSEDIAAN SUKU CADANG DI PT ABC MENGGUNAKAN METODE RCS (RELIABILITY CENTERED SPARES)

Fransiskus Tatas Dwi Atmaji(1*), Anak Agung Ngurah(2),


(1) Industrial and System Engineering School, Telkom University Jln. Telekomunikasi Terusan Buah Batu, Bandung, 40257,Indonesia
(2) Industrial and System Engineering School, Telkom University Jln. Telekomunikasi Terusan Buah Batu, Bandung, 40257,Indonesia
(*) Corresponding Author

Abstract


Based on data from the production and maintenance department, the highest downtime happen in JDK machine at ABC company. High downtime caused by spare parts lacking or replacement parts when the machine damaged, it cause the engine stop longer. This study analyze and determine spare part inventory the policy, especially critical components in JDK machine. Reliability Centered Spare (RCS) method used in this study, this method essentially determines the optimal spare parts policy for a certain period. The result of research with RCS method shows that the spare parts inventory policy for all critical components of JDK machine in one year ahead by storing or stocking the following amount: packing valve: 469 pieces; teflon: 134 pieces; bearing pump: 10 pieces; mechanical seal: 26 pieces; motor pump: 10 pieces; packing pump: 141 pieces; motor driving reel: 9 pieces; bearing driving reel: 45 pieces; mechanical seal driving reel: 163 pieces; packing heat exchanger: 70 pieces; site glass: 29 pieces; and pressure gauge: 7 pieces.


Keywords


Inventory Policy, Maintenance Management, Reliability Centered Spare (RCS), Spare Part

Full Text:

PDF

References


F. T. D. Atmaji, “Optimasi Jadwal Perawatan Pencegahan Pada Mesin Tenun Unit Satu Di PT KSM, Yogyakarta,” J. Rekayasa Sist. Ind., vol. 2, no. April, pp. 7–11, 2015.

J. Alhilman, F. T. D. Atmaji, and N. Athari, “Software application for maintenance system: A combination of maintenance methods in printing industry,” in 2017 5th International Conference on Information and Communication Technology, ICoIC7 2017, 2017.

M. Holgado and L. Fumagalli, “Value-in-use of e-maintenance in service provision: survey analysis and future research agenda,” IFAC-PapersOnLine, vol. 49, no. 28, pp. 138–143, 2016.

D. J. Smith, “Reliability, Maintainability and Risk,” Reliab. Maintainab. Risk, pp. 29–37, 2011.

C. Diallo, D. Ait-Kadi, and A. Chelbi, “Integrated spare parts management,” in Handbook of Maintenance Management and Engineering, 2009, pp. 191–222.

“Spare Parts Forecasting and Management,” in Springer Series in Reliability Engineering, vol. 25, 2010, pp. 409–432.

P. Slater, “The What , Why and How of the Reliability Centered Spares ( RCS ) Process,” Spare Parts Know How, p. 8, 2013.

M. Dogra, V. S. Sharma, A. Sachdeva, and J. S. Dureja, “TPM-A KEY STRATEGY FOR PRODUCTIVITY IMPROVEMENT IN PROCESS INDUSTRY,” J. Eng. Sci. Technol., vol. 6, no. 1, pp. 1–16, 2011.

A. J. Guillén, A. Crespo, J. F. Gómez, and M. D. Sanz, “A framework for effective management of condition based maintenance programs in the context of industrial development of E-Maintenance strategies,” Comput. Ind., vol. 82, pp. 170–185, 2016.

J. Moubray, “Reliability centered maintenance,” Handbook of Maintenance Management and Engineering. pp. 397–415, 2009.

R. W. Peters, “Reliable Maintenance Planning, Estimating, and Scheduling,” 2015.

N. P. Riyanto, W. A. Jauhari, A. Aisyati, and C. N. Rosyidi, “Developing maintenance policy for solna printing machine with reliability centered maintenance (RCM II),” in Lecture Notes in Engineering and Computer Science, 2014, vol. 2210, no. January.

W. van Jaarsveld, T. Dollevoet, and R. Dekker, “Improving spare parts inventory control at a repair shop,” Omega (United Kingdom), vol. 57, pp. 217–229, 2015.

W. Van Jaarsveld and R. Dekker, “Spare parts stock control for redundant systems using reliability centered maintenance data,” Reliab. Eng. Syst. Saf., vol. 96, no. 11, pp. 1576–1586, 2011.

E. Calixto, Chapter 4 - Reliability, Availability, and Maintainability (RAM Analysis). 2016.




DOI: https://doi.org/10.30988/jmil.v2i1.29

Article Metrics

Abstract view : 36 times
PDF - 42 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik



Jurnal Manajemen Industri dan Logistik is abstracting & indexing in the following databases: 

  DOAJ (Directory of Open Access Journal)           DOAJ (Directory of Open Access Journal)

 
 

View My Stats

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


ISSN 2622-528X (Print) and ISSN 2598-5795 (Online)

CORRESPONDENCE :

Unit Penelitian dan Pengabdian Masyarakat (UPPM)
Politeknik APP Jakarta
Kementerian Perindustrian
M. Tirtana Siregar
Managing Editor Jurnal Manajemen Industri dan Logistik
Telp. : 021-7867382/83
HP/WA : 082125910310
email :
jurnal@poltekapp.ac.id