PERBAIKAN TATA LETAK PENYIMPANAN BARANG DI GUDANG UNTUK REDUKSI JARAK TEMPUH PERJALANAN MATERIAL HANDLING

WINANDA KARTIKA(1*), AHMAD WIMBO HELVIANTO(2),


(1) Program Studi Manajemen Logistik Industri Elektronika Politeknik APP Jakarta
(2) Program Studi Manajemen Logistik Industri Elektronika Politeknik APP Jakarta
(*) Corresponding Author

Abstract


Warehouse acts as distributor of the product to the consumer. This is done by PT.XYZ as warehouse outsourcing. PT. XYZ manage a number of beverage products manufactured by PT ABC. The problem faced is the warehouse has not had an arrangement regarding the layout of product placement so that the preparation is done randomly depending on the overall storage blocks are empty. Each block storage in this warehouse holds only one type of product and the expiration date, so that the placement of the goods must be in blocks that are empty and do not take into account travel distance of material handling in the store and pick up the goods. In addition, the product storage memory depends only on the operator alone. Therefore, it is necessary to redesign the product placement on the storage location of the performance criteria minimize the total travel distance of material handling. Proposed layout product placement implementing dedicated storage method is a method for solving the layout of the warehouse includes product placement in the warehouse based on the amount of activity out of the product in the warehouse with the shortest distance to I/O point. With the application of this method, it is expected the product to be stored occupies a fixed location to enable the operator to store and retrieve the product. Results from a dedicated application, obtained the total travel distance by 23719.36 m, while the total mileage of the existing condition of 27038.1 with the percentage of 12.27% decline

 


Keywords


dedicated storage, layout of product placement, space requirement, throughput

References


Apple, J. (1990). Tata Letak Pabrik dan Pemindahan Bahan, Penerjemah: Nurhayati Mardiono.Bandung : Penerbit ITB.

Hadiguna, Rika dan Setiawan Heri.(2008).Tata Letak Pabrik.Yogyakarta:Andi Offset

Permana,I (2014). Relayout Tata Letak Penempatan Gudang Produk Jadi Baja Tulangan Dengan Menggunakan Metode Dedicated Storage di PT.ABC. Skripsi.Teknik Industri.Universitas Sultan Ageng Tirtayasa.

Sugiharto.(2009).Analisa Manajemen Pergudangan pada PD Sinar Agung Jaya untuk Meningkatkan Efektifitas.Tesis S1, Universitas Bina Nusantara.Jakarta

Sriyanto,Purwanggono Bambang dan Astuti Dessy T.(2009).Redesain Layout dan Prosedur Untuk Reduksi Waktu Setup Gudang Komponen.Jurnal Tesis S1, Universitas Dipenogoro, Semarang Vol 4, No2




DOI: https://doi.org/10.30988/jmil.v1i1.6

Article Metrics

Abstract view : 219 times
PDF FULL TEXT INDONESIA - 211 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik



Jurnal Manajemen Industri dan Logistik is abstracting & indexing in the following databases: 

       DOAJ (Directory of Open Access Journal)DOAJ (Directory of Open Access Journal)

 
 

View My Stats

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


ISSN 2622-528X (Print) and ISSN 2598-5795 (Online)

CORRESPONDENCE :

Unit Penelitian dan Pengabdian Masyarakat (UPPM)
Politeknik APP Jakarta
Kementerian Perindustrian
M. Tirtana Siregar
Managing Editor Jurnal Manajemen Industri dan Logistik
Telp. : 021-7867382/83
HP/WA : 082125910310
email :
jurnal@poltekapp.ac.id