2026-05-23T17:03:29Z https://jurnal.poltekapp.ac.id/index.php/JMIL/oai

oai:ojs.pkp.sfu.ca:article/1 2022-02-18T00:57:29Z JMIL:ART

ANALISIS DAMPAK COMPONENT COMMONALITY TERHADAP SCHEDULE INSTABILITY PADA SISTEM RANTAI PASOK SEDERHANA Ahmadi, Bilal Ratana, Dhany Surya component commonality schedule instability supply chain system This study analyzed the impact of component commonality to schedule instability. Analysis was implemented in the use of component commonality (use of same component in different product structures) in a simple supply chain system which is consist of one manufacturer and two suppliers. Different operational conditions were introduced such as: demand uncertainty, product cost structure, product lead time, product structure and inventory policy that company utilized. The simulation results suggested that common component could reduce schedule instability in both manufacturer and suppliers. Furthermore, the results also indicated that suppliers were the more affected entities due to uncertainty rather than manufacturer Politeknik APP Jakarta 2018-11-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/1 10.30988/jmil.v1i1.1 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 1 (2017): Page 1-74; 1-6 2598-5795 2622-528X 10.30988/jmil.v1i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/1/1 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/2 2022-02-18T00:57:29Z JMIL:ART

ANALISIS PERGUDANGAN DI BAGIAN GUDANG BARANG JADI (FINISHGOODS) PT NIPRESS TBK CILEUNGSI BOGOR Yusuf, Nurmaliana Nursyanti, Yevita Warehousing SOP (Standard Operating Procedures Work Instructions palletize FIFO (First In First Out) This research was made aiming to determine the work processes in the warehouse of finished goods, which has a main activity that is in the process of receiving, storing and shipping goods, especially in the warehouse of finished. This research was conducted by analyzing the actual conditions are compared to a SOP (Standard Operating Procedure) and Work Instructions. An SOP (Standard Operating Procedure) is made and documented in writing containing procedure or workflow to be achieved by a company or institution. In addition to analyzing the main activities of the warehouse, ths research also analyzes the process palletize (roll battery), standard processes FIFO (First In First Out), and also the process of inventory taking which three are in the process of storage of finished goods. This analysis included descriptive comparative analysis by comparing the actual conditions in the finished goods warehouse with a procedure and work instructions. The results of this analysis is the process activity finished goods warehouse of the receipt, storage, inventory taking, and local delivery is not in accordance with the procedures and work instructions are there, but a standard process FIFO (First In First Out), and the process palletize (rolls battery) has been carried out in accordance with the procedures and work instructions finished goods warehouse Politeknik APP Jakarta 2017-05-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/2 10.30988/jmil.v1i1.2 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 1 (2017): Page 1-74; 7-13 2598-5795 2622-528X 10.30988/jmil.v1i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/2/2 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/3 2022-02-18T00:57:29Z JMIL:ART

EVALUASI PEMILIHAN PENYEDIA JASA KURIR BERDASARKAN METODE ANALYTICAL HIERARCHY PROCESS (AHP) Astuti, Juli Fatma, Erika Courir services provider Analytical Hierarchy Process Logistics activity plays an important role in the business process where there is a distribution process to deliver product from the manufacturer / seller to the consumer. Nowadays there are many companies that provide logistics services with its own advantages and disadvantages. This condition, gives users more flexibility in determining which courier companies they will use. IN ordr to aid decision makers in selecting the best courier services providers, we conducted a study regarding the criteria used in determining user's choice by using Analytical Hierarchy Process (AHP). The purpose of this study was to determine the main criteria as user's consideration for selecting the best logistics service providers. Based on a survey conducted on the online sellers, it is known that the criteria of the key considerations in selecting a courier service is Reliability, the reliability of a courier company in serving the needs and desires of its customers, followed by cost and convenience Politeknik APP Jakarta 2018-11-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/3 10.30988/jmil.v1i1.3 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 1 (2017): Page 1-74; 14-26 2598-5795 2622-528X 10.30988/jmil.v1i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/3/3 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/4 2022-02-18T00:57:29Z JMIL:ART

SUPPLY CHAIN MANAGEMENT SUSTAINABILITY THROUGH THE PERFORMANCE IMPROVEMENT OF MTS-MTO PRODUCTION SYSTEM TYPOLOGY ANISSA, RIZKI Sustainable Supply Chain Management Supply Chain Order Reference CODP MTO-MTS. Batik has been acknowledged as a Masterpiece of Oral and Intangible Heritage of Humanity of Indonesia based on UNESCO in 2009 and this asset is considerably becoming the prospect to overcome global market in Asia. In the other side, the global competition can only be encountered by sustainably developing the internal industry. Therefore, this research elaborates sustainable supply chain performance assessment and also the improvement framework applied in Batik industry with MTO-MTS typology. For fulfilling the provisions of sustainability, the economic, environmental, and social is strictly important to be involved in.  Supply Chain Operations Reference (SCOR) is a reference model of assessment considering five attributes to be measured and implemented as the perspective of economic assessment. Employee's welfare and liquid waste assessment are then becoming the method to measure the social and environmental aspect. This resulted score as: Reliability is 89.24%, Responsiveness for MTS is 96% for MTO is 62%, Cost is 83.32%, Agility is 100%, and the Assets Management is 79.63%. For the social aspect, the score of parameter Health Insurance is 100%, Safety Tools is 100%, Basic Allowance is 70%, Annual Allowance is 100%, Appropriate Work Hours is 67%, and the Reward is 70%. For the environmental aspect, the temperature is 100%, pH 62.0%, BOD 100%, COD 64.7%, and TSS 7.4%. The improvement framework is also proposed by using Customer Order Decoupling Point (CODP) that results the increased performance in the Responsiveness attribute in the MTO process as much as 8.25%. Politeknik APP Jakarta 2018-11-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/4 10.30988/jmil.v1i1.4 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 1 (2017): Page 1-74; 27-42 2598-5795 2622-528X 10.30988/jmil.v1i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/4/4 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/5 2022-02-18T00:57:29Z JMIL:ART

PERBANDINGAN LOGISTIC PERFORMANCE INDEX (LPI) DAN PURCHASING MANAGER'S INDEX (M-PMI) DALAM MENGEVALUASI KINERJA LOGISTIK INDONESIA SUBEKTI, SUBEKTI JAYAWATI, DEVI LPI M-PMI Logistics The effectiveness of Logistics system is the main pillar for national industry and trade development and also for foreign investment attractiveness. Logistics performance at the macro or national level is evaluated using LPI (Logistics Performance Index) that issued by the World Bank. Beside that, the other one of economic indicators is M-PMI (Manufacturing Purchasing Managers Index) that evaluates the economic development of a country whether there is an increasing of the level of production, delivery of goods by the supplier, and inventory levels in the processing industry. This study fills a gap in assessing the relationship between LPI dan M-PMI. This study discusses the three things, firstly the condition of LPI Indonesia and the potential for improvement, secondly conditions M-PMI Indonesia 2013 - 2015, and thirdly, the relationship between M-PMI and LPI which analyze the impact of the changes of LPI values to the value of M-PMI. We use comparative analysis qualitatively. From the data analysis of LPI value in 2014 it shows that compared to the other ASEAN countries, Indonesia still needs a lot of improvement in customs clearance and delivery components. From the M-PMI curve it shows that when Indonesia's LPI is 2,94 in 2012 the value of Indonesia's M-PMI fluctuate with variation of 2.29. Meanwhile, when Indonesia's LPI is 3.08 in 2014, the value of the Indonesia's M-PMI more stable with a variation of 1, 69. We can conclude that the condition M-PMI will be more stable when the LPI is higher, but the movement of M-PMI was not significantly affected by LPI itself but rather on economic conditions, especially the interest rate, purchasing power, and the productivity of the manufacturing industry. Politeknik APP Jakarta 2018-11-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/5 10.30988/jmil.v1i1.5 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 1 (2017): Page 1-74; 43-55 2598-5795 2622-528X 10.30988/jmil.v1i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/5/5 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/6 2022-02-18T00:57:29Z JMIL:ART

PERBAIKAN TATA LETAK PENYIMPANAN BARANG DI GUDANG UNTUK REDUKSI JARAK TEMPUH PERJALANAN MATERIAL HANDLING KARTIKA, WINANDA HELVIANTO, AHMAD WIMBO dedicated storage layout of product placement space requirement throughput Warehouse acts as distributor of the product to the consumer. This is done by PT.XYZ as warehouse outsourcing. PT. XYZ manage a number of beverage products manufactured by PT ABC. The problem faced is the warehouse has not had an arrangement regarding the layout of product placement so that the preparation is done randomly depending on the overall storage blocks are empty. Each block storage in this warehouse holds only one type of product and the expiration date, so that the placement of the goods must be in blocks that are empty and do not take into account travel distance of material handling in the store and pick up the goods. In addition, the product storage memory depends only on the operator alone. Therefore, it is necessary to redesign the product placement on the storage location of the performance criteria minimize the total travel distance of material handling. Proposed layout product placement implementing dedicated storage method is a method for solving the layout of the warehouse includes product placement in the warehouse based on the amount of activity out of the product in the warehouse with the shortest distance to I/O point. With the application of this method, it is expected the product to be stored occupies a fixed location to enable the operator to store and retrieve the product. Results from a dedicated application, obtained the total travel distance by 23719.36 m, while the total mileage of the existing condition of 27038.1 with the percentage of 12.27% decline  Politeknik APP Jakarta 2018-11-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/6 10.30988/jmil.v1i1.6 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 1 (2017): Page 1-74; 56-70 2598-5795 2622-528X 10.30988/jmil.v1i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/6/6 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/7 2022-02-18T00:57:29Z JMIL:ART

RANCANGAN SISTEM ELEKTRONIK KANBAN UNTUK MENINGKATKAN EFEKTIVITAS PRODUKSI JUST IN TIME PUAR, ZAHIDI PUTRA SIREGAR, M TIRTANA Just In Time Sistem Kanban System production This research describes an electronic Kanban system development in order to replace conventional Kanban system. Many previous research conducted to optimize number of Kanban, however weaknesses still find when there is a change condition of production planning, therefore it must be re-optimization number of Kanban and it will takes time and costs. In current condition, the Company has implemented a manual Kanban system to support their  Just In Time production system, but unfortunately it still find problems during implementation due to the system implemented using paper and manual recording. In this research, the electronic Kanban system (e-Kanban) is develop based on computer vision which combined with production systems condition in currently. E-Kanban system is a method to replace manual Kanban irregularity. Based on result through a scenario Master Production Schedule (MPS), Electronic Kanban system can deliver information effciently and effectively with improve 54% compared with conventional systems and 32% compared with manual Kanban. Politeknik APP Jakarta 2018-11-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/7 10.30988/jmil.v1i1.7 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 1 (2017): Page 1-74; 71-74 2598-5795 2622-528X 10.30988/jmil.v1i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/7/7 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/8 2022-02-18T00:58:31Z JMIL:ART

PENGELOLAAN GUDANG LOGISTIK KEMANUSIAAN BNPB Rachmat Hidayat, Raden Didiet Firdaus, Mohammad Iqbal Lesmini, Lis logistics warehouse management warehouse guideliness The right storage of logistics and equipment intends to have the correct and accurate quantity to mobilize during the disaster happens.  This study investigates the warehousing management activities of the National Disaster Management Authority (BNPB) in XYZ warehouse located in North Jakarta in 2014. This study was conducted using a qualitative approach because it wanted to clearly and deeply describe the warehousing management activities in implementing the warehousing guidelines that have been assigned. The authors found that warehousing management activities carried out by the National Disaster Management Authority (BNPB) complies with the regulations of the Head of National Disaster Management Authority No. 6 of 2009 on Warehousing Guidelines. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/8 10.30988/jmil.v1i2.8 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 75-90 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/8/8 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/9 2022-02-18T00:58:31Z JMIL:ART

PENGEMBANGAN MODEL PERSEDIAAN ECONOMIC MANUFACTURING QUANTITY (EMQ) DENGAN PRODUK GANDA DAN STOCHASTIC Susanto, Sigit Economic Manufacturing Quantity Multi Item Stochastic Spreadsheet In the current era of globalization, there is freedom of the flow of products that make the competition between companies become more stringent. In order to survive, PT. XYZ must perform its activities effectively and efficiently on all its parts. One of these lines is the warehouse or inventory line. The existing inventory system and run by PT XYZ is a production environment that produces more than one final product and the demand for its products is uncertain. Based on the condition of PT XYZ, the writer approached the existing inventory system at PT XYZ with inventory model of Economic Manufacturing Quantity, multi item, and probabilistic. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/9 10.30988/jmil.v1i2.9 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 90-100 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/9/9 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/10 2022-02-18T00:58:31Z JMIL:ART

RANCANG BANGUN DECISION SUPPORT SYSTEM UNTUK PEMILIHAN RUTE PENGIRIMAN PAKET PADA PERUSAHAAN PENYEDIA JASA LOGISTIK Ahmadi, Bilal jayawati, devi traveling salesman problem google maps google maps API genetic algorithm Traveling Salesman Problem (TSP) is a well-known route optimization problem in which a set of customers is visited only once and all demands are satisfied within single route. Package delivery by a courier company can be considered into this type of problem. While many of the previous research had been conducted, the application of the solutions were limited due to unreal distance measure. This paper developed a decision support system for route optimization using free online maps from Google and Google Maps Application Programming Interface (API). Genetic Algorithm was employed to generate solutions within relatively short time. Furthermore, the solutions was viewed as a function of distance and time. There were some limitations from Google in case of acquiring distance data with the free of charge mechanism. Future research can tackle this backdraw by putting more customer points. Other heuristic methods could also be used for comparison purpose Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/10 10.30988/jmil.v1i2.10 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 101-110 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/10/10 10.30988/jmil.v1i2.10.g10 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/11 2022-02-18T00:58:31Z JMIL:ART

ANALISIS PENGARUH KURS USD, HARGA BATUBARA ACUAN, DAN VOLUME PRODUKSI TERHADAP VOLUME EKSPOR PADA PT. BUKIT ASAM (PERSERO) TBK. Anindita, Theresia syaputra, ari apri Kurs USD Coal Price Index Production Volume Export Volume The research method used is descriptive quantitative. The data used are the USD exchange rate, coal price index, production volume, and export volume of 2014-2016 which is converted in monthly form, it is expected that this research will be utilized by the company to consider export sales and further research. The result of research based on multiple linear regression analysis showed that R2 equal to 16,3% which mean influence of USD exchange rate, coal price index and production volume to export volume only had effect of 16,3%. Partially only reference coal price index variable which significantly have positive effect. In simultaneously, the independent variable does not significantly affect the dependent variable. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/11 10.30988/jmil.v1i2.11 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 111-120 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/11/11 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/12 2022-02-18T00:58:31Z JMIL:ART

PENJADWALAN PENGIRIMAN PRODUK KAOS OLEH C.V. CHRONICLE MART KEPADA SUB DISTRIBUTOR CIANJUR DENGAN MENGUNAKAN METODA DRP (DISTRIBUTION REQUIREMENT PLANNING) sutoni, akhmad DRP (Distribution Requirement Planning) EOQ (Economic Order Quantity) Inventory System. Pattern of market demand for company C.V. Chronicle Mart in each period is not constant, always changing. The Company also faces competition with companies engaged in similar fields in order to meet market demand. Production planning activities are the company's strategy in conducting its production process to face the changing market demand. The company has problems with the quantity of goods production and distribution system that compete well, such as delivery time, quantity, and type of goods delivered, resulting in shortage or excess inventory. Method for planning and scheduling of distribution activity is by using DRP (Distribution Requirement Planning) with order policy using EOQ (Economic Order Quantity). In this research, we get the optimum cost of 103,265,000 rupiah in a year Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/12 10.30988/jmil.v1i2.12 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 121-132 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/12/12 10.30988/jmil.v1i2.12.g12 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/13 2022-02-18T00:58:31Z JMIL:ART

ANALISIS PERENCANAAN PERSEDIAAN BATUBARA FX DENGAN METODE MATERIAL REQUIREMENT PLANNING Arief, Muhammad Supriyadi, Supriyadi Fix Period Requirement Material Requirement Planning Planning A company often has difficulty in controlling raw materials,it could be surplus or minus. Preventing these problem,we made a problem solving. Material needs planning is made for efficient and effective materials application  in the execution of work, so the problems because of material is avoided.this  research purpose is planning  and controlling raw material and supplier selection by Material Requirement Planning (MRP) method. Material Requirement Planning is a method for determining materials or components which  make or buy, how much it is needed and when it is needed. The result using the calculation by MRP method show Fix Period Requirement (FPR) is the best method, because the calculation of Fix Period Requirement method got the lowest total cost that is  Rp.18,722,190,090, -.FPR is obtained a profit about Rp. 6.096.088.915,00 or about 25% more efficient than the method applied company. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/13 10.30988/jmil.v1i2.13 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 133-139 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/13/13 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/14 2022-02-18T00:58:31Z JMIL:ART

ANALISIS PEMILIHAN KARAKTER SUPERHERO SEBAGAI LISENSI PRODUK PADA MINUMAN SUSU FRISIAN FLAG (MILKY, FRUITY, DAN MUT MUT) DALAM MENARIK MINAT BELI KONSUMEN Murti, Aji Kresno Kurniawan, Muhammad Sani Licence Superhero Interest This research is an analysis that aimed to see the suitability between super hero character (Iron Man, Spiderman, Thor, Captain America) chosen by Frisian Flag Indonesia as a license on Milky, Fruity and Mut mut products toward information allotted in the packaging. Besides, it also explored the interest of kids to the character. It was multi method research. It involved desktop-research and survey which enabled respondents to bring out their perception. The results of this study was Iron Man considered to be a very appropriate character, reflected from the  survey and comparison toward the nutrition. Thus, from this research, it is a suggestion for Frisian Flag to focus Iron Man character as one of the steps to increase sales and consumer buying interest. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/14 10.30988/jmil.v1i2.14 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 140-146 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/14/14 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/15 2022-02-18T00:58:31Z JMIL:ART

ANALISIS KUALITAS PELAYANAN DENGAN METODE SERVICE QUALITY (SERVQUAL) DAN IMPORTANCE PERFORMANCE ANALYSIS (IPA) PADA PT. MEDIA PURNA ENGINEERING Winarno, Heru Absor, Tb Service Quality Service Quality (Servqual) Importance Performance Analysis (IPA) PT. Media Purna Engineering is a company engaged in the field of mechanical maintenance services rotating, hydraulic systems, construction, and piping. PT. Media Purna Engineering has never conducted a measurement of the level of satisfaction of its partner companies so that in improving the quality of service and in overcoming the complaints have not been done properly. The purpose of this study is to improve the quality of service to the satisfaction of partner companies namely PT. Krakatau Steel (Persero) Tbk for the services provided. The research method used is the method of Service Quality (Servqual) and Importance Performance Analysis (IPA) to measure the level of satisfaction and quality of services provided .. Based on research results indicate that the quality of service PT. Media Purna Engineering is good, but there are 1 service quality attribute that still need to be improved or developed from 25 attribute of service quality, that is at the 15th attribute about speed in giving solution. Recommendations for improvement include the introduction of the work area, new workers should always be supervised and supervised, schedule training, constraints please quickly inform Lieder or Supervisor to be quick in providing solutions to overcome them. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/15 10.30988/jmil.v1i2.15 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 146-160 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/15/15 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/16 2022-02-18T00:58:31Z JMIL:ART

ANALISA PERBANDINGAN DIFERENSIASI PRODUK PADA RADUSA.CO DAN MAPLE_ID Bernik, Merita Dwinandita, Thifal Al thavia Product Differentiation Fashion Compariso In Indonesia the fashion business developments take place quite rapidly. Along with the increased efforts in the field of fashion, causing competition among entrepreneurs engaged in the same field. Various strategies drawn up by the employers in order to win or retain its position as market leader. There are many businesses especially fashion handbags are such change or modify the appearance of the product. When talking about the uniqueness of bags for teenagers and adults may employers bag will compete to create innovative products to create a variety of sizes and colors, unlike the case with the children's work unique bags are bags production Radusa Company and Maple Indonesia. The objective of this study was to compare product  differentiation of Radusa Company and Maple Indonesia and to know that consumers have been able to identify well the product  differentiation that had been produced compared to their competitors The research method used is a mix method that is quantitative method and qualitative method, to be able to describe a certain condition about product differentiation at Radusa Company and Maple Indonesa. The sampling technique used is nonprobability sampling with purposive method, where the sample is the consumer who is at least 16 years old. For each company taken a sample of 30 consumers. The results of this study indicate that the outline of Radusa Company has differentiated the product in terms of shape, quality of performance, suitability of quality, durability, reliability, ease of improvement and style. While Maple Indonesia has a differentiation of products viewed from the form, features, quality performance, quality conformance, durability, reliability, ease of improvement and style. Based on the respondent's statement about the comparison of product differentiation and Wilcoxon test, it is found that Radusa Company is better than Maple Indonesia Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/16 10.30988/jmil.v1i2.16 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 161-170 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/16/16 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/17 2022-02-18T00:58:31Z JMIL:ART

STUDI LITERATUR KEPEMIMPINAN WIRAUSAHA DALAM MENGHADAPI TANTANGAN GLOBAL Safuan, Safuan Leadership Global Entrepreneurship The progressions have raises new standards and every organization is required to roll out improvements quick, right and adaptable, in light of the fact that generally the organization will be hard to contend all around later on. The ramifications of worldwide ecological change expects organization to change the methodology of the organization that initially situated to nearby all inclusive arranged, to the organization without bounds should dependably be inviting to future hierarchical changes keeping in mind the end goal to have the capacity to be leaders of progress later on. It takes entrepreneurial leadership to react to difficulties of worldwide change with the goal that the organization can adjust and still exist in zone of worldwide rivalry. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/17 10.30988/jmil.v1i2.17 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 171-181 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/17/17 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/18 2022-02-18T00:58:31Z JMIL:ART

DESAIN SISTEM INTELEJENSIA BISNIS PADA RANTAI PASOK PRODUK JAMU BERBASIS PENTAHO BUSINESS INTELLIGENCE Aryati, Aster Anwar, Dian system analysis system design keyword business intelligence system This paper designs business intelligence system for supply chain of herbal products in Indonesia. System design is done with system entity approach to obtain system attributes, conceptual system design using Businees Process Modeling Notation (BPMN) 2.0 and unified modeling language (UML) and finally integrated with pentaho business intelligence suite suite including integration and business analytics data. The result of business intelligence system design is able to transform raw data into information and mengintrpertasikannya in the form of a visual supply chain herbal products for the purposes of identification, development and create new business strategy opportunities. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/18 10.30988/jmil.v1i2.18 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 171-189 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/18/18 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/19 2022-02-18T00:58:31Z JMIL:ART

Strategi Pemasaran dengan menggunakan Analisis SWOT Tanpa Skala Industri Pada PT X Di Jakarta Wicaksono, Arie Strategy SWOT Analysis No Industry Scale In the business competition that increasingly tight along with the development of new technology that more advanced and modern makes Companies attempted to find the quick and appropriate strategy in marketing products to fulfill industry needs. The development of industrial era that gradually grow in the various fields, especially for heavy equipment industry that need to take a strategy in order to win the competition and to obtain larger market share. This research uses quantitative descriptive research method by describing facts and explaining the situation based on facts and figures data that exist and try to analyze the truth through the data obtained. The analytical method used is SWOT Analysis of TSI (No Industry Scale) using EFAS (external factor analysis) and IFAS (internal factor analysis) analysis. The results of this study indicate that company X in using the SWOT Without Industrial Scale puts the strategy of Strength (S)> Opportunity (O), Strategy Opportunity (O)> Weakness (W), Strength Strategy (S)> Threat (T) and Threat Strategy> Weakness (W), so that this condition that PT X is in position to utilize SO strategy which has highest score value that is = 7.6, followed by strategy ST = 6.6, WO = 6.0 and WT=4.8. From these results, the strategy undertaken by company X is to maintain the brand image strategy and penetrate the market to find a larger market share. Strengthening human resources (HR) needs to be done so that companies can add and train human resources, especially professional technicians. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/19 10.30988/jmil.v1i2.19 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 192-201 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/19/19 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/20 2022-02-18T00:58:31Z JMIL:ART

PEMILIHAN SUPPLIER BERDASARKAN INDEKS KAPABILITAS DENGAN KARAKTERISTIK TUNGGAL Prasetyo, Erik Bagus supplier selection quality pH levels yield index single characteristics Raw materials is a major requirement in the production process for manufacturing companies. in fulfilling the needs of raw materials for the production process, most manufacturing firms depends on suppliers. Supplier selection is an important part of manufacturing companies. From several supplier selection criteria, quality is one of the important criteria and it used in supplier assessment. Selecting suppliers based on the quality of their products will have a positive impact on manufacturing companies, such as increased profits through reduced operational costs and increased market share. In this study will compare two suppliers at manufacturing companies and choose one that has a higher capability value. The selection of suppliers is made using the yield index of Spk with a single characteristic. Supplier will be selected by comparing the yield ratio of two suppliers. Numerical calculations are performed on suppliers based on pH levels on the leather. The pH level on the leather will affect the color. A low pH may result color degradation earlier, whereas a high pH may result poor color matching. Politeknik APP Jakarta 2018-12-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/20 10.30988/jmil.v1i2.20 Jurnal Manajemen Industri dan Logistik; Vol. 1 No. 2 (2017): page 75 - 208; 202-208 2598-5795 2622-528X 10.30988/jmil.v1i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/20/20 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/21 2022-02-18T00:59:12Z JMIL:ART

Pengaruh Variabel Peningkatan Produktivitas , Penguasaan Teknologi Baru dan Pelatihan Terhadap Pengendalian Mutu Terpadu Karyawan Pada Industri Tekstil dan Garmen di Surakarta Darmawi, Ahmad Darsono, Darsono Productivity Training Technology Development Integrated Quality Control. Integrated Quality Control requires the participation of all divisions within the company, such as marketing, design, manufacturing. Laboratory examination. As an integrated process that focuses on customers and beneficiaries, it simultaneously aims to protect and enhance the satisfaction of all stakeholders. Employee development does cost a lot, but it is a long-term investment for the company in personnel. Because skilled and skilled employees will be able to work more efficiently, effectively, wastage of raw materials, and less machine wear, better results will increase the company's competitiveness. The purpose of this research is (a) to know the level of Employee Productivity (TPK), (b) Employee Training (PK) and (c) Latest Technology Development (PTT) whether the positive effect on Integrated Employee Quality Control (PMTK). This research use Survey research method by using quantitative approach. The results obtained the employee Productivity Level positive effect on Integrated Quality Control Employees with 0,072 standardized coefficients. Employee Training has a positive effect on Integrated Employee Quality Control with a standardized coefficient of 0.164. Latest Technology Development positively influences to Integrated Quality Control Employee with a coefficient of standardized 0,114. Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/21 10.30988/jmil.v2i1.21 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 03-14 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/21/21 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/22 2022-02-18T00:59:12Z JMIL:ART

DAMPAK KINERJA BAURAN PEMASARAN TERHADAP KEPUTUSAN KULIAH CALON MAHASISWA POLITEKNIK X CIMAHI Suharyanto, Suharyanto marketing mix study decision linier regression The higher education service providing become one of business which needs hard working especially in student recruitment. The alumni of vocational high school (SMK) and general high school (SMA) who will to continue study in higher education, can become to be opportunities. To keep these, the higher education institutions have to compete with the others, applying  right marketing mix. This research article shows the marketing mix performance  effects to student candidates decision to study in Polytechnic X Cimahi. The research population are student canditates in academic year of 2017, and 50 samples were got simple randomly. The effects of marketing communication mix and marketing mix to student decision analysed using simple linier regression model. The research result shows that variables of  marketing mix performance  gives medium effects 61,4% to student decision, and 38,6% effected by others. The linier regression model constructed is Y= 0,690X +1,248. Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/22 10.30988/jmil.v2i1.22 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 15-27 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/22/22 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/23 2022-02-18T00:59:12Z JMIL:ART

STUDI KASUS PENERAPAN VENDOR MANAGED INVENTORY PADA SISTEM RANTAI PASOK Martono, Ricky Virona vendor managed inventory collaboration single level analysis Vendor Managed Inventory (VMI) is an approach in managing inventory between supplier and consumer in an supply chain system. In VMI concept, supplier keeps its inventory at consumer's warehouse, meanwhile inventory ownership belong to supplier until it is used by consumer. The advantage of VMI is to reduce inventory replenishment ordering process and to reduce the usage of consumer's warehouse space. Some key factors to achieve VMI success are: coordination, communication, production system and inventory order reliability.When supplier is a subsidiary of consumer, coordination between the two usually puts them not at an equivalent level, especially when supplier's infrastructure is not as good as that at consumer. This research is a case study at a pharmaceutical company and its supplier which acts as its subsidiary. Information and data gathered by deep interview to all parties responsible for supply chain, production, and inventory at supplier and consumer sides. The results show advantages and obstacles in applying VMI, thus long-term commitment is needed to reach a better performance. Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/23 10.30988/jmil.v2i1.23 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 28-39 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/23/23 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/24 2022-02-18T00:59:12Z JMIL:ART

ANALISIS EFEK MUSIM HUJAN DAN KEMARAU TERHADAP HARGA BERAS Jati, Kumara Rainy and Dry Seasons ARMA ARCH/GARCH Stock and Rice Price This study analyzes the effects of the rainy and dry seasons on rice prices. Autoregressive and Moving Average (ARMA) and Autoregressive Conditional Heteroskedasticity / Generalized Autoregressive Conditional Heteroskedasticity (ARCH / GARCH) with a dummy variable. We used daily data of the stock and the price of rice from January 29, 2014 until January 29, 2018. ARMA (0,1)-ARCH (1) model with dummy variable that is dry season is more influence conditional variance of rice price compared with rainy season dummy variable. Stakeholders need to pay more attention to fluctuations in rice prices, especially in the dry season because rice supply is relatively less and there is only puso harvest. Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/24 10.30988/jmil.v2i1.24 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 40-51 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/24/24 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/25 2022-02-18T00:59:12Z JMIL:ART

PENGARUH GAYA KEPEMIMPINAN DAN MOTIVASI KERJA TERHADAP KINERJA PEGAWAI Hanafi, Andhi Sukma Almy, Chairil Siregar, M Tirtana leadership style work motivation employee performance Leadership style is a style used by a leader to lead the organization by using existing resources within the organization to achieve organizational goals. Human resources are one of the resources that exist within the organization that can be utilized leader for the achievement of organizational goals. Employees are human resources that can be utilized by a leader in achieving organizational goals. It is important for a leader to be able to use an appropriate leadership style with the organization, in an effort to improve employee work motivation, which affects the performance of employees who support the achievement of organizational goals. In this study will be discussed about the performance of employees who are influenced by the style of leadership and work motivation. The results showed that employee performance is influenced by the level of work motivation and leadership style. In addition, the appropriate style of leader will affect the level of employee motivation, so it can significantly improve the performance of employees within an organization. Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/25 10.30988/jmil.v2i1.25 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 52-61 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/25/25 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/26 2022-02-18T00:59:12Z JMIL:ART

ANALISIS PENGENDALIAN KUALITAS TERJADINYA CACAT PADA PROSES PRODUKSI ADJUSTER R KWB (Studi Kasus di PT. Dina Karya Pratama. (Cicadas-Bogor) Dharmayanti, Indrani Rahayu, Ajeng Quality Control Statistical Quality Control (SQC) Seven Tools This study aims to find out the production process of Adjuster R KWB (a part of automotive sparepart),  the defect analysis and causes in PT. Dina Karya Pratama. It is a manufacturing company engaged in metal industry, especially automotive,. Quality control analysis is done using statistical called seven tools consisting of check sheet, p control chart, pareto diagram, and cause  and effect diagram to answer those problems.  The results of analysis show that the production process is controlled by the average proportion of defects (0.0071283). The level of disability is dominated by screw jam (50%) and circle not symmetry (35%). The main factors causing the defect are the engine factor that has not been hot, the method factor and the inaccuracy of labor. Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/26 10.30988/jmil.v2i1.26 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 62-71 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/26/26 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/27 2022-02-18T00:59:12Z JMIL:ART

ANALISIS RANTAI NILAI UNTUK MENINGKATKAN PENJUALAN PADA DISTRO SCREAMOUS Bernik, Merita Wulan Gunawan, Tamara Nur Value Chain Sales Increased Sales The era of free trade spurred causing intense competition among companies. Competition can be based on quality, price or provide more value for its customers. Distro Screamous is a retail company enganged in the apparel industry. To get a more Distro Screamous must have a competitive advantage, one of them by analyzing the value chain in Distro Screamous. The method used is descriptive method is a method of research by collecting data systematically and accurately describe the implementation of the value chain analysis in Distro Screamous. Data collection techniques used  by interview, observation and kuesioner. Kuesioner using non probability sampling methods. Based on the results of the implementation of value chain research in Distro Screamous has been good to have an average value of 4.18. However, there are some in the implementation of the value chain that was below the average of them: Infrastructure Company, Human Resources and Operations. In the implementation of the value chain Distro Screamous has several problems that must be faced that Distro Screamous to make efforts to improve the implementation of the value chain. Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/27 10.30988/jmil.v2i1.27 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 72-78 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/27/27 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/28 2022-02-18T00:59:12Z JMIL:ART

PENENTUAN RUTE KENDARAAN PADA SISTEM DISTRIBUSI LOGISTIK PASCA BENCANA (STUDI KASUS) Andriansyah, Andriansyah Sentia, Prima Denny Disaster Vehicle Routing Problem Branch and Bound Insertion Heuristic Local Search The success indicators of disaster mitigation can be seen from the disaster logistics system. Effective and efficient distribution network can make a good disaster logistics system. The problem that related to the design of this network is the vehicle routing problem. The objective is determined optimal route of relief distribution from warehouse to victims with minimum time duration. The problem is solved by branch and bound, insertion heuristic, and local search algorithms. The results obtained by branch and bound and local search algorithm are optimal global. Time duration of vehicle using these algoritm is 1.0562 hours. However, computation time using branch and bound algorithm is very long until 22 hours while local search algorithm only takes 60 seconds. The insertion heuristic algorithm also produces a good solution. Time duration of vehicle using this algoritm is 1,1030 hours. This solution is local optimal, but the computation time is very short, only 0.001 seconds. Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/28 10.30988/jmil.v2i1.28 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 79-89 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/28/28 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/29 2022-02-18T00:59:12Z JMIL:ART

KEBIJAKAN PERSEDIAAN SUKU CADANG DI PT ABC MENGGUNAKAN METODE RCS (RELIABILITY CENTERED SPARES) Dwi Atmaji, Fransiskus Tatas Ngurah, Anak Agung Inventory Policy Maintenance Management Reliability Centered Spare (RCS) Spare Part Based on data from the production and maintenance department, the highest downtime happen in JDK machine at ABC company. High downtime caused by spare parts lacking or replacement parts when the machine damaged, it cause the engine stop longer. This study analyze and determine spare part inventory the policy, especially critical components in JDK machine. Reliability Centered Spare (RCS) method used in this study, this method essentially determines the optimal spare parts policy for a certain period. The result of research with RCS method shows that the spare parts inventory policy for all critical components of JDK machine in one year ahead by storing or stocking the following amount: packing valve: 469 pieces; teflon: 134 pieces; bearing pump: 10 pieces; mechanical seal: 26 pieces; motor pump: 10 pieces; packing pump: 141 pieces; motor driving reel: 9 pieces; bearing driving reel: 45 pieces; mechanical seal driving reel: 163 pieces; packing heat exchanger: 70 pieces; site glass: 29 pieces; and pressure gauge: 7 pieces. Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/29 10.30988/jmil.v2i1.29 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 90-102 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/29/29 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/30 2022-02-18T00:59:12Z JMIL:ART

REVIEWER ACKNOWLEDGEMENTS FOR JURNAL MANAJEMEN INDUSTRI DAN LOGISTIK VOL. 2 NO. 1 MEI 2018 Siregar, M Tirtana Reviewer Acknowledgements for Jurnal Manajemen Industri dan Logistik, Vol. 1, No. 2 Mei 2018 Politeknik APP Jakarta 2018-12-04 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/30 10.30988/jmil.v2i1.30 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 1 (2018): page 03 - 103; 103 2598-5795 2622-528X 10.30988/jmil.v2i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/30/30 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/31 2022-02-18T01:00:59Z JMIL:ART

PENERAPAN PROSES DAN TEKNIK PERAMALAN – STUDI KASUS DI MANUFAKTUR TRANSFORMER Oey, Elia Ayrine, Gabriella Karolina Forecasting Exponential Smoothing Holt Winter Demand forecasting is essential for business processes and firm's profitability. A Good demand forecasting requires the expertise and reliability of the planning staff. The research is a case study in a transformer manufacturer in Indonesia, which planned to apply forecasting process and suitable tools for their products. The study demonstrated a systematic step required in forecasting the four studied products. For each product, 6 forecast models were evaluated and the best model was selected by optimizing forecast parameters which give the least forecast errors. The chosen forecasting model is a simple model but fairly complete in forecasting evaluation, to accommodate both trend and seasonal possibility in product forecasting. The study offers the basis for the company to establish forecasting processes and tools for its products. It also recommended the studied company to perform and monitor its forecasting process for continuous improvement to its business process. Politeknik APP Jakarta 2018-12-11 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/31 10.30988/jmil.v2i2.31 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 2 (2018): page 106 - 205; 106-115 2598-5795 2622-528X 10.30988/jmil/v2i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/31/32 Copyright (c) 2018 Elia Oey , Gabriella Karolina Ayrine

oai:ojs.pkp.sfu.ca:article/32 2022-02-18T01:00:59Z JMIL:ART

FAKTOR EKSTERNAL DALAM PENENTUAN STRATEGI DASAR PROGRAM PENDIDIKAN BIDANG REKAYASA LOGISTIK DAN RANTAI SUPLAI Aurachman, Rio Supply Chain Management Logistics Strategy Abstract In planning education strategies in the field of logistics and SCM, external factors evaluation approach can be implemented. This study proposes the approach of mass media sources and latest news as a basis for determining external factors, as a result, the formulation obtained is newest and more contextual. Those external factors then are going to be analyzed to formulate a strategy that is suitable for logistics education. The strategy emerges into several main things; although it is not time to lead fully to Industry 4.0, the Education curriculum should include knowledge that is aligned and supports the knowledge, Soft Skills that needed to be in logistics and supply chain education are English language skills and the ability to search for data. Object of the research in terms of logistics education which currently growing interests are namely logistics and SCM marine, e-commerce and international zones. Graduates need to be equipped with the ability to do business process efficiently and digitize all business processes. Politeknik APP Jakarta 2018-12-11 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/32 10.30988/jmil.v2i2.32 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 2 (2018): page 106 - 205; 116-126 2598-5795 2622-528X 10.30988/jmil/v2i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/32/33 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/33 2022-02-18T01:00:59Z JMIL:ART

MULTIPLIER EFEK PENINGKATAN INVESTASI SEKTOR INDUSTRI PENGOLAHAN DI KAWASAN INDUSTRI TERHADAP KINERJA SEKTOR PENGANGKUTAN/LOGISTIK Winardi, Winardi Kustanto, Heru Manufacturing Industry Industrial Estate Transportation/logistics Social Accounting Matrix. The manufacturing industry sector is an economic sector that provides the largest contribution to the national economy so that the performance of the manufacturing industry greatly affects overall economic performance. Industrial sector investment is currently required to be located within industrial estates in order to improve efficiency, organize space, manage the environment and optimize the multiplier effects on other economic sectors. This study aims to analyze the multiplier effects of increased investment in the manufacturing industry sector in industrial estate on the performance of the transport/logistics sector. The analysis model uses the Social Accounting Matrix (SAM) Model, which is an effect multiplier analysis. The results of the research show that the increase in investment in the manufacturing industry sector located in the industrial area provides a multiplier effect on improving the performance of the transportation/logistics sector in the form of increased transportation/logistics sector revenues. Politeknik APP Jakarta 2018-12-11 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/33 10.30988/jmil.v2i2.33 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 2 (2018): page 106 - 205; 127-134 2598-5795 2622-528X 10.30988/jmil/v2i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/33/34 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/34 2022-02-18T01:00:59Z JMIL:ART

ANALISIS KUALITAS PELAYANAN DAN KEPUASAN KONSUMEN DUNKIN DONUTS GADING SERPONG Gandhy, Abel Service Quality Consumer Satisfaction Dunkin Donuts This study aims to determine service quality and customer satisfaction of Dunkin Donuts customer in Gading Serpong. Service quality are consists of tangible, reliability, responsiveness, assurance, and empathy. Research conducted at Dunkin Donuts Gading Serpong from April-July 2017. Respondents are used as research samples amounted to 100 people. Data were processed by using Index Performance Analysis (IPA) and Customer Satisfaction Index (CSI) method. Overall, the services provided by dunkin donuts outlet in Gading Serpong is good, because they can meet the expectations of their customer. The value of Customer Satisfaction Index (CSI) is 86.76%. This illustrate that Dunkin Donuts customers in Gading Serpong are very satisfied with the service quality performance provided by Dunkin Donuts. Improvement of services that need to be done is the speed of employees in handling customer complaints, improving the cleanliness of toilet facilities, and improving employee friendliness while serving customers Politeknik APP Jakarta 2018-12-11 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/34 10.30988/jmil.v2i2.34 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 2 (2018): page 106 - 205; 135-146 2598-5795 2622-528X 10.30988/jmil/v2i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/34/35 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/35 2022-02-18T01:00:59Z JMIL:ART

PEMILIHAN SUPPLIER TERBAIK PENYEDIA BARANG CONSUMABLE MENGGUNAKAN METODE ANALYTICAL HIERARCHY PROCESS (Studi kasus di Departemen Pengadaan Barang PT. PUSRI) Pratiwi, Irnanda MZ, Hermanto Aprilyanti, Selvia Supplier Selection Analitycal Hierarchy Process (AHP) Best Supplier Consumable goods Supplier selection is one of the most important activity of company's procurement of goods and services function. One of the methods that can be used is Analytical Hierarchy Process (AHP). This research was conducted in Procurement Department of PT. PUSRI Palembang. This study focuses on suppliers of consumable goods because this goods most often purchased. The sample of  the research were the employees in the department of goods procurement that handle the purchase of consumable goods. The final result of relative importance's supplier selection criteria was found :First  Priority is Price (0,42), Second Priority is Quality (0,33), Third Priority is Response (0,11) and Fourth Priority is Delivery (0,09) and last priority is customer care (0,08 ). The fisrt priority supplier is PT. Kokai Indo Abadi (0.47). The result of this study that PT. Kokai Indo Abadi is the most consistent company in the procurement of consumable goods so it can be included in the next auction. Politeknik APP Jakarta 2018-12-11 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/35 10.30988/jmil.v2i2.35 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 2 (2018): page 106 - 205; 147-158 2598-5795 2622-528X 10.30988/jmil/v2i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/35/36 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/36 2022-02-18T01:00:59Z JMIL:ART

ANALISIS PROSES PACKAGING DAN STUFFING PERUSAHAAN FURNITUR LOKAL DALAM MENJAGA EKSISTENSI PERSAINGAN GLOBAL (STUDI KASUS: UD SURYA ABADI FURNITURE, SUKOHARJO, JAWA TENGAH) Pratama, Yogi Pasca Afisena, Dicky Sarosa, Bambang furniture industry packaging stuffing Indonesia has great potential in developing the furniture industry sector. The abundance of raw materials and high labor numbers should be optimized to encourage the furniture industry in Indonesia in the international furniture trade. However, in reality, the Indonesian furniture industry has increasingly been eliminated in the arena of international furniture trade. Therefore, it is necessary to consider how the furniture industry actually manages the company. One of the influential factors in furniture exports is how to manage the supply chain or logistics of the furniture industry, where one of them is related to the process of packaging and stuffing of furniture products. As a representation, this study tries to describe how the packaging and stuffing process is carried out by UD Surya Abadi Furniture, one of the furniture industries located in Sukoharjo Regency, Central Java. This research is a descriptive study, where data is collected by observation, interview, and documentation techniques. The results of this study discuss the packaging procedures, materials used and feasibility tests, and how the procedures and benefits obtained from the stuffing process at UD Surya Abadi Furniture. The conclusion obtained is that the description of the packaging and stuffing process that is carried out is quite good with the use of materials that meet the standards. Nevertheless, the process of packaging and stuffing at UD Surya Abadi Furniture is still done with manual counting so that it is not optimal. Politeknik APP Jakarta 2018-12-11 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/36 10.30988/jmil.v2i2.36 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 2 (2018): page 106 - 205; 159-167 2598-5795 2622-528X 10.30988/jmil/v2i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/36/37 10.30988/jmil36.g37 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/37 2022-02-18T01:00:59Z JMIL:ART

BALANCE SCORECARD DALAM ANALISIS KINERJA KOPERASI (Studi Kasus pada Koperasi Unit Desa (KUD) Bayongbong Kabupaten Garut, Jawa Barat) Suseno, Gijanto Purbo Nataliningsih, Nataliningsih Wahyuni, Nuni Balance Scorecard cooperative performance four perspectives service improvement Village Unit Cooperative (KUD) Bayongbong Garut Regency, Wes Java, is a livestock cooperative whose business activities are multi purpose. The purpose of cooperatives is to improve the welfare of members in particular and society in general, in accordance with the interests and needs of its members. The purpose of this study is to measure the performance of cooperatives by using Balanced Scorecard and efforts to be done so that cooperatives can improve its performance. Balanced Scorecard is a rapid measurement and control management system, precise and comprehensive, consisting of four perspectives: financial, customer, internal business processes and learning and growth. The results showed that the non-financial perspective of internal business consisting of livestock food business, cooperation business with State Electricity Company (PLN), Convenience Store, have a better perspective with score score 372, compared with other perspective that is customer perspective with value 832 and growth learning perspective with score 492. Suggestions that can be submitted are independent KUD Bayongbong must be able to improve service for customers and employee satisfaction, provide adequate information system and provide learning or training for its employees Politeknik APP Jakarta 2018-12-11 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/37 10.30988/jmil.v2i2.37 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 2 (2018): page 106 - 205; 168-177 2598-5795 2622-528X 10.30988/jmil/v2i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/37/38 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/38 2023-06-07T08:13:48Z JMIL:ART

PENGARUH PELAYANAN DAN KEPUASAN TERHADAP LOYALITAS NASABAH KREDIT PADA PT. BPR X Batubara, Faisal H Service Satisfaction Loyalty Customer The purpose of this study is to determine how much influence between the services provided and the level of satisfaction obtained on loyalty of credit customers at PT. BPR X. Techniques used in collecting data is using the method of field observation, interviews to respondents and the distribution of questionnaires. The population used in this research is credit customers of PT. BPR X which amounted to 386 credit customers, sampling technique used is a purposive method obtained by the sample of 60 respondents or by 15% of the population. Methods of data analysis using multiple linear regression analysis, correlation test, determinant test, partial t test and multiple F test. The result of multiple linear regression analysis shows that Y = 0,254 + 0,474 X1 + 0,445 X2 meaning without Xeria veriabel (service) and X2 (satisfaction) then variable Y (satisfaction) remain 0,254. Based on the correlation test results of correlation value of  0,533 which means having a medium relationship in accordance with the criterion limits that have been determined at the correlation interval (0.40 - 0.59 category strong enough). The determinant test shows the value of R square of 0.284, which means the influence of service variables and satisfaction on the loyalty variable is 28.4%, the rest of 71.6 % is influenced by other independent variables which are not included in this research that is the level of competition, market demand , price, promotion, and so on. The result of t test is obtained by t value of service variable (2,169)> t-table (1,671) with significance value 0,034 below 0,05 hence it shows that service variable does not have significant influence to loyalty and obtained value t-count variable customer satisfaction (3.653)> t-table (1,671) with a significance value of 0.001 below 0.05 then it shows that customer satisfaction variables does not significantly influence loyalty. The result of F test shows that service (X1) and customer satisfaction (X2) have positive effect and significant  on Customer loyalty (Y), this is proven by F test calculation obtained F count = 11,313 bigger than Ftable 2,370. The significant level obtained is (0,000) this value can be said to be absolutely significant because it is valued at 0,000 and smaller than the significant standard (5% or 0.05) Politeknik APP Jakarta 2018-12-11 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/38 10.30988/jmil.v2i2.38 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 2 (2018): page 106 - 205; 178-191 2598-5795 2622-528X 10.30988/jmil/v2i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/38/39 10.30988/jmil.v2i2.38.g39 Copyright (c) 2018 Jurnal Manajemen Industri dan Logistik

oai:ojs.pkp.sfu.ca:article/41 2022-02-18T01:01:35Z JMIL:ART

OPTIMASI SISTEM ANTRIAN PADA LAYANAN KESEHATAN MASYARAKAT MENGGUNAKAN PENDEKATAN SIMULASI Findari, Widya Setia Nugroho, Yohanes Anton system optimizing public health queue simulation DMAIC Six Sigma Abstract : The purpose of this study is to optimize service time in a community health center. The average number of patients visiting is 100 to 300 per day. In certain units there is a heavy queue of patients which increases service waiting times, including registration units, inspection units, and pharmaceutical units. The initial observation data on the existing system shows the waiting time for patient services is 2,7 hours. This fact shows that the time of patient service on the existing system needs to be optimized so that the waiting time can be accelerated. This study offers a solution to optimize the service queue system using a simulation approach. The DMAIC (Define, Measure, Analyze, Improve, Control) Six Sigma method is used as a basis for analyzing the waiting time for services from an existing system. The results of the analysis are used in the simulation test to obtain improvement factors using several scenarios. The best simulation results are obtained with the scenario of adding operators in all units. Optimizing the waiting time of patient services using the best scenario simulation approach is shown by the decrease in waiting time of the queue system by 1,05 hours or 38,9% faster than the existing system.Keywords: System Optimizing; Public Health; Queue; Simulation; DMAIC Six SigmaAbstrak : Tujuan penelitian ini adalah untuk mengoptimalkan waktu tunggu pelayanan di sebuah pusat kesehatan masyarakat (Puskesmas). Rata-rata jumlah pasien yang berkunjung adalah 100 hingga 300 per hari. Pada beberapa unit tertentu terjadi antrian pasien yang padat sehingga meningkatkan waktu tunggu pelayanan, antara lain unit pendaftaran, unit pemeriksaan, dan unit farmasi. Data pengamatan awal pada sistem yang ada menunjukkan waktu tunggu pelayanan pasien adalah 2,7 jam. Fakta ini menunjukkan bahwa waktu pelayanan pasien pada sistem yang ada perlu dioptimalkan agar waktu tunggu dapat dipercepat. Penelitian ini menawarkan solusi optimalisasi sistem antrian pelayanan dengan menggunakan pendekatan simulasi. Metode DMAIC (Define, Measure, Analyze, Improve, Control) Six Sigma digunakan sebagai dasar analisis waktu tunggu pelayanan dari sistem yang sudah ada. Hasil analisis digunakan pada uji simulasi untuk mendapatkan faktor perbaikan dengan menggunakan beberapa skenario. Hasil simulasi terbaik diperoleh dengan skenario penambahan operator di semua unit. Optimasi waktu tunggu pelayanan pasien dengan menggunakan pendekatan simulasi skenario terbaik ditunjukkan oleh penurunan waktu tunggu sistem antrian sebesar 1,05 jam atau 38,9% lebih cepat dari sistem yang sudah ada.Kata kunci: Optimasi Sistem, Layanan Kesehatan, Antrian, Simulasi, DMAIC Six Sigma Politeknik APP Jakarta 2019-03-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/41 10.30988/jmil.v3i1.41 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 1 (2019): page 01 - 93; 14-22 2598-5795 2622-528X 10.30988/jmil.v3i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/41/pdf22 Copyright (c) 2019 Widya Setia Findari, Yohanes Anton Nugroho

oai:ojs.pkp.sfu.ca:article/44 2022-02-18T01:00:59Z JMIL:ART

PENENTUAN FREKUENSI PEMESANAN KOMPONEN LENSA KAMERA MENGGUNAKAN METODE DETERMINISTIK DINAMIS UNTUK MEMINIMALISASI BIAYA PERSEDIAAN PADA PT XACTI INDONESIA Hadiyanti, Lisa Siregar, M Tirtana Order frequency Inventory Cost Dynamic Deterministic This study aims to determine the comparison of order determination on camera lens components and the costs incurred between company policies and dynamic deterministic methods. This study uses dynamic deterministic methods, namely Wagner-Whitin Algorithm, Silver Meal, Least Unit Cost, Economic Part Period, Lot For Lot and Least Total Cost to determine the amount of costs incurred by the company each time the order on the camera lens component. Of all these dynamic deterministic methods, the most efficient is the Wagner-Whitin Algorithm method with an order frequency of 10 times the order and the cost incurred is Rp. 34,529,190. The Silver Meal method with the order frequency of 10 times the order and the cost incurred is Rp. 35,390,310. Least Unit Cost method with the order frequency of 10 times the order and the cost incurred is Rp. 35,234,830. The method of the Economic Part Period with an order frequency of 10 times the order and costs incurred in the amount of Rp. 35,390,310. Method Lot For Lot with the order frequency of 12 times the order and the cost incurred is Rp. 36,720,396. And the Least Total Cost with the order frequency of 10 times the order and the cost incurred is Rp. 35,390,310. In company policy, 12 orders are made at a cost of Rp. 36,720,396. So that the proposed improvement can be given is that the company is expected to use the Wagner-Whitin Algorithm method which has a minimum order frequency and cost. Politeknik APP Jakarta 2018-12-11 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/44 10.30988/jmil.v2i2.44 Jurnal Manajemen Industri dan Logistik; Vol. 2 No. 2 (2018): page 106 - 205; 192-205 2598-5795 2622-528X 10.30988/jmil/v2i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/44/40 Copyright (c) 2018 M Tirtana Siregar , Lisa Hadiyanti

oai:ojs.pkp.sfu.ca:article/59 2022-02-18T01:01:35Z JMIL:ART

KAJIAN INDUSTRI 4.0 UNTUK PENERAPANNYA DI INDONESIA Hadi, Suharman Murti, Hari Wisnu IR 4.0 effective efficient Abstract : The implementation of concept Industry 4.0 in Indonesia has been studied in this paper. The study was motivated after the launcing of Making Indonesia 4.0 by the President of the Republic of Indonesia in April 2018. The study aims to study the concept of IR 4.0 for its implementation in Indonesia. Methods include collecting various references with industry 4.0 keywords, applying information technology, pharmaceutical industry and manufacturing industries. The results of the study concluded that industry 4.0 was an era that empowered the role of manufacturing digitalization and supply networks that involved the integration of digital information from various sources and locations to drive manufacturing and distribution physically. It is found that, There are five main technologies for IR 4.0, namely Artificial Intelligence (AI), Internet of Things (IoT), Wearable Technology (WT), Advanced Robotic (AR) and 3D Printing (3DP). Each component of technology can be used in various industries and manufacturing. The implementation of IR 4.0 would likely provide more benefits and advantages such as increase effieciency and effectivty in manufacturing industries.Keywords: Concept of IR 4.0, application of information technology, manufacturing industry.Abstrak : Telah dilakukan kajian yang mempelajari konsep Industri 4.0 (IR.4.0)untuk penerapannya di Indonesia.  Kajian dilatar belakangi oleh dicanangkannya making Industri 4.0 oleh Presiden RI pada bulan April 2018.  Kajian bertujuan mempelajari konsep IR 4.0 untuk implementasinya di Indonesia.  Metode meliputi pengumpulan berbagai referensi dengan kata kunci industry 4.0, penerapan teknologi informasi, industru farmasi dan industry manufaktur.  Selanjutnya referensi tersebut dianalisis dan diskripsi sehingga menghasilkan suatu ringkasan.  Hasil kajian menyimpulkan bahwa industry 4.0 merupakan era yang memberdayakan peran digitalisasi manufaktur dan jaringan suplai yang melibatkan integrasi informasi digital dari berbagai sumber dan lokasi untuk menggerakkan manufaktur dan distribusi secara fisik. Terdapat lima teknologi utama IR 4.0, yaitu artificial Intelligence (AI), Internet of Things (IoT), Wearable Technology (WT), Advanced Robotic (AR) dan 3D Printing (3DP).  Masing-masing komponen teknologi dapat dimanfaatkan pada berbagai industry dan manufaktur.  Pemanfaatan IR 4.0 diyakini akan memberikan manfaat dan keuntunganyang lebih banyak (misalnya kinerja menjadi lebih efektif dan lebih efisien).Kata kunci :  Konsep IR 4.0, penerapan teknologi informasi, industry manufaktur. Politeknik APP Jakarta 2019-03-15 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/59 10.30988/jmil.v3i1.59 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 1 (2019): page 01 - 93; 01-13 2598-5795 2622-528X 10.30988/jmil.v3i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/59/pdf21 10.30988/jmil59.g42 Copyright (c) 2019 Suharman Hadi , Hari Wisnu Murti

oai:ojs.pkp.sfu.ca:article/61 2022-02-18T01:00:08Z JMIL:ART

APAKAH KEINTIMAN KEPADA KONSUMEN BERPENGARUH TERHADAP KEPUASAN KONSUMEN? STUDI KASUS PADA TEMPAT PENYEDIA JASA SERVIS MOBIL DI KOTA BANDUNG Kamal (Universitas Padjadjaran - Indonesia), Irsyad Indika (Universitas Padjadjaran - Indonesia), Deru R Revinzky (Universitas Padjadjaran - Indonesia), Muhamad Aqshel keintiman kepada konsumen kepuasan konsumen kualitas servis Abstract A shift in marketing orientation, from transactional marketing to long-term and involves emotions that become the current trend. Many ways and efforts made by the company to win the current competition is to conduct customer intimacy towards its customers. This research is aimed to see how the relationship between customer intimacy and customer satisfaction, measured using ordinary linear regression. Independent variable in this research is customer intimacy with factors of Tailoring, Coaching, and Partnering, and dependent variable customer satisfaction with Tangible, Empathy, Responsiveness, Reliability and Assurance as its factors, processed using customer satisfaction index method. Purposive sampling method is used to reach 100 respondents and the data is analyzed using ordinary linear regression. Simultaneous t- test is used to test hypotheses with significance level of 10%. Result shows that customer intimacy has positive and significant influence to customer satisfaction. Customer intimacy is able to define 14,8% customer satisfaction. This indicates a low relationship of customer intimacy to customer satisfaction in car service center.  Keywords: customer intimacy; customer satisfaction; service quality Abstrak Orientasi pemasaran yang mulai beralih dari pemasaran transaksional menjadi pemasaran yang bersifat jangka panjang dan melibatkan emosi menjadi tren saat ini. Banyak cara dan upaya yang dilakukan oleh perusahaan untuk memenangkan persaingan saat ini adalah dengan melakukan customer intimacy terhadap konsumen nya. Penelitian bertujuan untuk melihat hubungan antara customer intimacy terhadap customer satisfaction yang diukur berdasarkan regresi linier sederhana. Penelitian ini menggunakan customer intimacy sebagai variable independen dengan faktor-faktor Tailoring, Coaching, dan Partnering sedangkan variabel dependen yang digunakan adalah customer satisfaction dengan faktor-faktor Tangible, Empathy, Responsiveness, Reliability, dan Assurance yang diolah menggunakan metode customer satisfaction index. Penelitian ini menggunakan metode purposive sampling sebagai sampel dengan menggunakan 100 tanggapan responden untuk diteliti. Data dianalisis dengan regresi linear sederhana. Pengujian hipotesis menggunakan Uji t simultan dengan tingkat signifikansi 10%. Hasil pengujian menggunakan uji t menunjukkan bahwa di tempat penyedia jasa servis mobil variabel customer intimacy berpengaruh positif signifikan terhadap customer satisfaction. Selain itu variabel customer intimacy dapat menjelaskan 14,8% variabel customer satisfaction. Hal ini mengindikasikan adanya pengaruh yang rendah tapi pasti dari customer intimacy terhadap customer satisfaction di tempat penyedia jasa servis mobil. Kata kunci: keintiman kepada konsumen; kepuasan konsumen; kualitas servis Politeknik APP Jakarta 2019-11-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/61 10.30988/jmil.v3i2.61 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 2 (2019): page 94 - 173; 164-173 2598-5795 2622-528X 10.30988/jmil.v3i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/61/pdf Copyright (c) 2019 Irsyad Kamal, Deru R Indika, Muhamad Aqshel Revinzky

oai:ojs.pkp.sfu.ca:article/63 2022-02-18T01:01:35Z JMIL:ART

PERHITUNGAN EFEKTIFITAS LINTASAN PRODUKSI MENGGUNAKAN METODE LINE BALANCING Dharmayanti, Indrani Marliansyah, Hafif lintasan produksi line balancing Killberg & Wester Rank Position Weight efisiensi lini produksi Abstract : This study aims to determine how effective and efficient the production line and calculate the optimal time  to process a candy product. The data was measured by stopwatch, then tested for uniformity and adequacy to obtain a value to do line balancing analysis using the Killbridge and Wester methods and Rank Position Weight, then performance of the  initial line  is compared with the results of analysis. The results of analysis using both line balancing methods, show that line efficiency were 76.1%, increasing by 43.1% from the efficiency of the initial line by 33%. The result of the balance delay (BD) calculation is 23.92% decreased by 53%, and the smoothness index 17.79  fell by 74.98  from the initial line which means that the proposed production line are more efficient than the initial line. The optimum time needed for production start from sugar tipping to the packaging are 91,29 minutes.Keywords: line balancing; line efficiency; Killberg & Wester; Rank Position WeightAbstrak : Penelitian bertujuan untuk mengetahui seberapa efektif dan efisien lintasan produksi yang digunakan pada proses produksi permen, serta menghitung waktu optimal yang dibutuhkan dalam produksi. Pengambilan data primer dilakukan dengan metode pengukuran langsung menggunakan jam henti  yang selanjutnya diuji keseragaman, dan kecukupan datanya sehingga diperoleh sebuah nilai untuk kemudian dilakukan analisis keseimbangan lini dengan menggunakan metode Killbridge dan Wester dan Rank Position Weight. Selanjutnya performansi lintasan awal dibandingkan dengan hasil analisis keseimbangan lini. Dari hasil analisis menggunakan kedua metode line balancing tersebut diperoleh hasil efisiensi lini sebesar 76,1%,  meningkat sebesar 43,1% dari efisiensi keadaan lintasan awal sebesar 33%. Hasil perhitungan balance delay (BD) adalah sebesar 23,92% turun 53% dari kondisi awal; dan  smoothness index 17,79 turun sebesar 74,98 yang artinya hasil analisis lintasan usulan lebih efisien dibandingkan dengan keadaan lintasan awal. Hasil analisis waktu optimum yang dibutuhkan untuk produksi mulai dari tipping gula sampai proses pengemasan adalah 91,29 menit.Kata kunci: efisiensi lini produksi,  keseimbangan lintasan; Killberg & Wester; Rank Position Weight Politeknik APP Jakarta 2019-05-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/63 10.30988/jmil.v3i1.63 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 1 (2019): page 01 - 93; 43-54 2598-5795 2622-528X 10.30988/jmil.v3i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/63/pdf Copyright (c) 2019 Indrani Dharmayanti Darmana, Hafif Marliansyah M

oai:ojs.pkp.sfu.ca:article/71 2022-02-18T01:01:35Z JMIL:ART

PENGARUH AGLOMERASI DAN HUBUNGAN VERTIKAL INDUSTRI TERHADAP PRODUKTIVITAS INDUSTRI DI INDONESIA Agustina, Betty Yarsita Lubis, Andi Fahmi agglomeration downstream productivity spillover upstream Abstract : The research objectives is to analyze agglomeration over the company's productivity of 2 important factors of agglomeration: interindustry (localization) and cross industry spillover (urbanization) and review its effect if those agglomeration derives from upstream or downstream industry. In addition to it, this research is determining on how geographic distance and economic distance against spillover strength. By means of the company‘s level panel data of heavy and medium industrial survey result by the National Statistical Bureau in local regency/municipality level ranging from 2008 to 2015 and 2010 output input table to see the vertical industry relation, the outcomes may show that both company accepting positive and significant impact on productivity spillover of the same industrial sector, and other industrial sector in the same region. Nevertheless, the more far the area geographically, the less its impact. Productivity spillover is also determined from upstream dan downstream industries concentrating in the same region. However, the economic distance effect is not identified on the upstream level. Hence, the policy implication of the research result is to encourage and shaping the downstream industries, facilitate technology transfer from upstream companies, and periodically evaluate industrial estates.Keywords: agglomeration, downstream, productivity, spillover, upstream.Abstrak : Penelitian ini bertujuan untuk menganalisis pengaruh aglomerasi terhadap produktivitas perusahaan dari dua faktor penting aglomerasi, yaitu intraindustry (lokalisasi) dan crossindustry spillover (urbanisasi) dan mengkaji bagaimana pengaruhnya jika aglomerasi tersebut berasal dari industri upstream atau downstream dari perusahaan tersebut. Selain itu penelitian ini juga ingin membuktikan pengaruh jarak geografis dan jarak ekonomi terhadap kekuatan spillover. Dengan menggunakan data panel level perusahaan dari hasil survei industri besar dan sedang BPS untuk tingkat kabupaten kota dengan rentang waktu tahun 2008-2015 dan Tabel input output 2010 untuk melihat hubungan vertikal industri, diperoleh kesimpulan bahwa perusahaan menerima dampak spillover produktivitas yang positif dan signifikan dari berkumpulnya perusahaan dari sektor industri yang sama, maupun dari sektor industri lain yang berada di wilayah yang sama. Namun makin jauh jarak geografisnya, pengaruh tersebut semakin kecil. Spillover produktivitas juga diperoleh dari perusahaan sektor upstream dan downstream yang berkumpul diwilayah yang sama dengan perusahaan tersebut. Makin dekat jarak ekonominya makin besar pengaruh spillover dari sektor downstream. Pengaruh jarak ekonomi ini tidak ditemukan pada sektor upstream. Dengan demikian implikasi kebijakan dari hasil penelitian yaitu mendorong terciptanya hilirisasi industri, memfalitasi transfer teknologi dari perusahaan upstream, dan melakukan evaluasi kawasan industri secara berkala.Kata kunci: aglomerasi, downstream, produktivitas, spillover, upstream. Politeknik APP Jakarta 2019-04-15 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/vnd.openxmlformats-officedocument.spreadsheetml.sheet application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/71 10.30988/jmil.v3i1.71 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 1 (2019): page 01 - 93; 23-42 2598-5795 2622-528X 10.30988/jmil.v3i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/71/294 https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/71/pdf24 Copyright (c) 2019 Betty Yarsita Agustina, Andi Fahmi Lubis

oai:ojs.pkp.sfu.ca:article/72 2022-02-18T01:01:35Z JMIL:ART

MODEL TRANSPORTASI PENGIRIMAN PRODUK PERISHABLE DENGAN MULTI KENDARAAN Kartika, Winanda Abstract : According to Graf theory, the shortest path determination is a problem of looking for a path between two vertices in a weighted graph to obtain the minimum amount of weight.The determination of the shortest path problem also called optimization problem. Several algorithms have been developed in solving this problem. Each algorithm has a different way of solving a particular problem. In this study, the development of algorithms was carried out to determine the critical path from one origin point to one destination point on a network for the delivery of perishable products that limited time window to minimize the total cost and the selection of vehicles that will be used for solving the problem.The Algorithm that developed is Dijkstra algorithm. The first stages of the algorithm development is to modify the network of the studied problem by making the network replication. The second stage is to make problem-solving steps to minimize the total cost, consists of a fixed cost, variable cost, vehicle turnover costs, deterioration cost and parking fees with modified Dijkstra algorithm because the problems can not be modeled mathematically.To test the developed algorithm, we used numerical examples with hypothetical dataKeywords: perishable product; deterioration; time window; modified Dijkstra algorithmAbstrak : Menurut teori Graf, penentuan rute terpendek merupakan suatu persoalan mencari lintasan antara dua buah simpul pada graf berbobot untuk mendapatkan jumlah bobot yang paling minimum. Permasalahan penentuan rute terpendek disebut juga masalah optimasi.Beberapa algoritma telah dikembangkan dalam pemecahan masalah ini. Setiap algoritma memiliki cara yang berbeda dalam menyelesaikan suatu permasalahan tertentu. Pada penelitian ini, dilakukan pengembangan algoritma untuk menentukan lintasan kritis dari satu titik asal ke satu titik tujuan pada suatu jaringan untuk pengiriman produk perishable dan dibatasi jendela waktu dengan meminimumkan total biaya sekaligus pemilihan jenis kendaraan yang akan digunakan untuk pemecahan masalah. Algoritma yang dikembangkan adalah Algoritma Dijkstra. Tahapan awal pengembangan algoritma adalah memodifikasi jaringan dari masalah yang diteliti dengan cara membuat replikasi jaringan. Tahapan kedua adalah membuat langkah pemecahan masalah untuk meminimumkan total biaya yaitu biaya tetap, biaya variabel, biaya pergantian kendaraan, biaya deteriorasi dan biaya tunggu dengan modifikasi Algoritma Dijkstra. Modifikasi Dijkstra dilakukan karena permasalahan yang diteliti tidak bisa dimodelkan secara matematis. Pengujian algoritma menggunakan contoh numerik dengan data hipotetik.Kata kunci: produk perishable; deteriorasi; jendela waktu; modifikasi Algoritma Dijkstra. Politeknik APP Jakarta 2019-05-10 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/72 10.30988/jmil.v3i1.72 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 1 (2019): page 01 - 93; 55-72 2598-5795 2622-528X 10.30988/jmil.v3i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/72/pdf Copyright (c) 2019 Winanda Kartika

oai:ojs.pkp.sfu.ca:article/119 2022-02-18T01:01:35Z JMIL:ART

PENGARUH SUNK COST IMPORT ENTRY DAN IMPORT SPILLOVER TERHADAP KEPUTUSAN MENGIMPOR BAHAN BAKU PADA PERUSAHAAN MANUFAKTUR DI INDONESIA Wulandari, Niken Lubis, Andi Fahmi decision to import sunk cost of import entry spillover dynamic panel data Abstract : Regardless the benefits of imported inputs, uncertainties in foreign markets and highly sunk inisial costs (e.g. cost of searching foreign suppliers), become a barrier to entry for most of firm and causing persistent to use the imported input. However, the sunk cost entry give the information insentives about import activities for the importer. So, when importers are neighboring in a location, they pottentially induce knowledge spillovers to the other firms. The more importers at that location, the more knowledge is spread, so that it can potentially reduce initial import costs and increase the prospensity to import for other neighbors. This study uses dynamic panel data of Indonesian manufacturing firms from 2007 until 2015, to examine the determinant of decision to import, especially sunk cost and spillovers. The results of the GMM difference estimation indicate that firm who imported last year and two years earlier more likely to import input this year, both for domestic and foreign firms. This study also found a positive correlation between probability of importing input and the number of importer in the same region regardless of their industrial affiliation. However, this finding is limited only to indegenous firm which generated by agglomeration of indegenous importers.Keywords: decision to import, sunk cost of import entry,  spillover, dynamic panel dataAbstrak : Terlepas dari manfaat imported input, ketidakpastian di pasar luar negeri dan biaya inisial yang tinggi dan sunk mencegah sebagian besar perusahaan untuk mengimpor dan menyebabkan perusahaan persisten mengimpor bahan baku.  Namun, sunk cost entry tersebut sarat akan informasi terkait aktivitas impor, sehingga berpotensi menimbulkan knowledge spillover ketika importir berdekatan di satu lokasi tertentu. Semakin banyak importir di lokasi tersebut, semakin banyak informasi yang tersebar, sehingga dapat mengurangi biaya inisial impor dan meningkatkan kecenderungan untuk mengimpor bagi perusahaan lain. Penelitian ini mengunakan data panel dinamis perusahaan manufaktur di Indonesia (2007 - 2015) untuk mempelajari determinan keputusan impor bahan baku, terutama sunk cost entry dan import spillover. Hasil estimasi GMM difference menunjukkan perusahaan yang mengimpor satu dan dua tahun sebelumnya cenderung akan mengimpor bahan baku tahun ini, baik bagi perusahaan domestik maupun asing. Penelitian ini juga menemukan adanya hubungan positif antara keputusan impor dengan jumlah importir yang berada di satu kabupaten baik di industri yang sama maupun berbeda. Namun, temuan tersebut terbatas hanya terjadi bagi perusahaan domestik yang berasal dari aglomerasi importir domestik.Kata kunci: keputusan untuk impor, sunk cost import entry, spillover, data panel dinamis Politeknik APP Jakarta 2019-05-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/119 10.30988/jmil.v3i1.119 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 1 (2019): page 01 - 93; 73-92 2598-5795 2622-528X 10.30988/jmil.v3i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/119/pdf 10.30988/jmil.v3i1.119.g49 Copyright (c) 2019 Niken Wulandari

oai:ojs.pkp.sfu.ca:article/122 2022-02-18T01:00:08Z JMIL:ART

UPAYA IMPROVEMENT PENGENDALIAN PERSEDIAAN SUKU CADANG DENGAN METODE FIXED TIME PERIOD PADA PT XYZ Risyahadi (Universitas IPB - Indonesia), Sazli Tutur Putri (Universitas IPB - Indonesia), Hanifah Yunan ABC Analysis Fixed Time Period Methods Inventory Management Abstract  Perusahaan yang memiliki keinginan untuk memenangkan persaingan yang terus meningkat di era globalisasi, perlu terus menerus melakukan perbaikan metode pengendalian persediaan suku cadangnya. Metode existing di perusahaan memiliki beberapa kekurangan seperti belum mempertimbangkan standar deviasi demand dan service level yang dikehendaki oleh perusahaan. Tujuan kajian ini adalah melakukan perbaikan pengelolaan persediaan suku cadang dengan menerapkan model yang memiliki karakteristik pengadaan yang sesuai dengan perusahaan. Model Fixed Time Period (FTP) adalah model yang sesuai karena telah memenuhi karakteristik pengelolaan persediaan di perusahaan seperti pemesanan barang dengan interval waktu yang konstan dan demand yang berfluktuatif. Hasil menunjukkan bahwa jumlah pemesanan pada suku cadang bandsaw dengan menggunakan metode existing perusahaan di tahun 2018 selalu lebih tinggi quantity ordernya dibandingkan dengan menggunakan metode FTP. Berbeda dengan suku cadang bandsaw, suku cadang thermoc, jumlah order dengan metode FTP tidak selalu lebih rendah; bahkan metode FTP seringkali lebih tinggi atau pun sama quantity ordernya pada tahun 2018.  Kata Kunci: Analisis ABC, Metode Fixed Time Period, Manajemen Inventori The company that has the desire to winning the increasing competition in the era of globalization need to improve the method of spare parts inventory control continually. Existing approaches in companies have several disadvantages such as not considering the standard deviation of demand and service level desired by the company. The purpose of this study is to improve the management of spare parts inventories by implementing a model that have right characteristics that are in line with the company. The Fixed Time Period (FTP) model is an appropriate model because it has fulfilled the characteristic of inventory management in companies such as ordering goods with constant time intervals and fluctuating demand. The results show that the number of orders on bandsaw parts using the existing company method in 2018 always has a higher order quantity than using the FTP method. Unlike bandsaw parts, thermoc parts, the number is not still lower; even the FTP method was often higher or equal to the order quantity in 2018. Keywords: ABC Analysis, Fixed Time Period Methods, Inventory Management Politeknik APP Jakarta 2019-11-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/122 10.30988/jmil.v3i2.122 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 2 (2019): page 94 - 173; 129-140 2598-5795 2622-528X 10.30988/jmil.v3i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/122/pdf Copyright (c) 2019 Sazli Tutur Risyahadi, Hanifah Yunan Putri

oai:ojs.pkp.sfu.ca:article/138 2022-02-18T01:00:08Z JMIL:ART

INOVASI MEMEDIASI TQM DAN KINERJA PERUSAHAAN PADA SEKTOR UKM Masnita (Universitas Trisakti - Indonesia), Yolanda Rahman (Universitas Trisakti - Indonesia), Abdul Veraldy (Universitas Trisakti - Indonesia), Andhika total quality management incremental innovation radical innovation firm performance SMEs Abstract In strategy competition, innovation must be clear and precise in accordance with consumer demand and expectations. Limited organizational resources require organizations to manage innovation clearly. The company's efforts to change or increase product output, both from its processes and services, are interpreted as innovation. This study aims to examine the effect of total quality management on company performance with two approaches, additional innovation and radical innovation. The hypothesis was tested from data collected from 108 food and beverage SMEs registered at the Indonesian Food and Beverage Entrepreneurs Association - GAPMMI using convenience sampling data processed with AMOS. The results of the study show that additional innovation as a TQM mediator has an influence on company performance. In addition, testing shows that radical innovation has no effect on company performance. Therefore, additional innovation is the best way that SMEs can choose as a TQM approach to influence company performance. This research can contribute to small and medium enterprises in the selection of innovations in the practice of TQM. This will help entrepreneurs get better company performance Key words: total quality management; incremental innovation; radical innovation; firm performance; SMEs AbstrakDalam kompetisi strategi, inovasi harus jelas dan tepat sesuai dengan permintaan dan harapan konsumen. Terbatasnya sumber daya organisasi menuntut organisasi mengelola inovasi dengan jelas. Upaya perusahaan untuk mengubah atau meningkatkan output produk, baik dari proses dan layanannya, ditafsirkan sebagai inovasi. Penelitian ini bertujuan untuk meneliti pengaruh manajemen kualitas total terhadap kinerja perusahaan dengan dua pendekatan, inovasi tambahan dan inovasi radikal. Hipotesis diuji dari data yang dikumpulkan dari 108 UKM makanan dan minuman yang terdaftar di Gabungan Pengusaha Makanan dan Minuman Indonesia – GAPMMI dengan menggunakan convenience sampling data diolah dengan AMOS. Hasil penelitian menunjukkan bahwa inovasi tambahan sebagai mediator TQM, memiliki pengaruh terhadap kinerja perusahaan. Selain itu, pengujian menunjukkan bahwa inovasi radikal tidak berpengaruh pada kinerja perusahaan. Oleh karena itu, inovasi tambahan adalah cara terbaik yang dapat dipilih oleh UKM sebagai pendekatan TQM untuk mempengaruhi kinerja perusahaan. Penelitian ini dapat berkontribusi untuk usaha kecil dan menengah dalam pemilihan inovasi dalam praktik TQM. Hal ini akan membantu pengusaha mendapatkan kinerja perusahaan yang lebih baik Kata kunci: manajemen kualitas total; inovasi tambahan; inovasi radikal; kinerja perusahaan; UKM Politeknik APP Jakarta 2019-11-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/138 10.30988/jmil.v3i2.138 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 2 (2019): page 94 - 173; 155-163 2598-5795 2622-528X 10.30988/jmil.v3i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/138/pdf Copyright (c) 2019 Yolanda Masnita, Abdul Rahman, Andhika Veraldy

oai:ojs.pkp.sfu.ca:article/146 2022-02-18T01:00:08Z JMIL:ART

PERLUKAH PENDAMPINGAN TERHADAP PELAKU UMKM DALAM MEMANFAATKAN MEDIA SOSIAL SEBAGAI SALURAN PEMASARAN STRATEGIS? Primanto (Universitas Islam Malang - Indonesia), Alfian Budi Rahman (Universitas Islam Malang - Indonesia), Fahrurrozi Perceived Usability Perceived Usefullness SME's Intention To Use Social Media Marketing Abstract The rapid change and easy to use technology should be able to trigger the use of technology in MSME. However, the reality tells the different. There is only few MSMEs that already implement and use technology (social media) as their part of business strategy. Therefore, this research aim to know what is the factor that affects MSMEs attitude toward technology (social media) adoption through perceived usefulness and perceived ease to use. Researcher use individual and external factor which consist of social influence, compatibility, organizational barrier, self-efficacy, and individual proficiency. This research uses descriptive analysis and path analysis as analysis method with questionnaire as data gathering method. This research concluded that social value, compatibility and self-efficacy has significant effect toward perceived easy to use and perceived of usefulness. The low of individual proficiency regarding social media indicates that there is an opportunity for academicians or anyone to be a mentor for UMKM in exploring social media channel. Keywords: Perceived Usability, Perceived Usefullness, SME's, Intention To Use, Social Media, Marketing  Abstrak Pemanfaatan teknologi merupakan faktor krusial dalam keberlangsungan UMKM. Sayangnya, tidak banyak UMKM yang memanfaatkan teknologi (media sosial) ini sebagai strategi pemasaran dan penjualan mereka. Berdasarkan fenomena tersebut, peneliti berkeinginan untuk mengetahui faktor apakah yang menyebabkan rendahnya tingkat adopsi media sosial sebagai saluran pemasaran baru bagi pelaku UMKM. Peneliti menggunakan kombinasi faktor individual dan eksternal seperti pengaruh sosial, kompatibilitas, hambatan organisasi, keyakinan-sendiri, dan kemahiran terhadap media sosial sebagai pembentuk presepsi kegunaan dan kemudahan media sosial serta niat penggunaan secara tidak langsung. Penelitian ini menggunakan analisa deskriptif dan jalur sebagai metode analisis dengan kuesioner sebagai instrumen peneletian. Penelitian ini berhasil membuktikan bahwa pengaruh sosial, kompatibilitas, dan keyakinan diri berpengaruh terhadap persepsi kemudahan penggunaan dan persepsi kegunaan. Kurangnya pemahaman tentang pengaplikasian media sosial yang ditunjukkan pada rendahnya kemahiran penggunaan media sosial dapat menjadi peluang bagi akademisi untuk menghubungkan UMKM dengan media sosial baik sebagai tutor ataupun administrator.Kata kunci: Persepsi Kegunaan, Persepsi Kemudahan Penggunaan, UMKM, Niat Penggunaan, Media Sosial, Pemasaran Politeknik APP Jakarta 2019-11-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/146 10.30988/jmil.v3i2.146 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 2 (2019): page 94 - 173; 119-128 2598-5795 2622-528X 10.30988/jmil.v3i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/146/pdf Copyright (c) 2019 Alfian Budi Primanto

oai:ojs.pkp.sfu.ca:article/170 2022-02-18T01:00:08Z JMIL:ART

ANALISA KAPASITAS PRODUKSI DI STASIUN PERAKITAN DENGAN METODE PENJADWALAN DETERMINISTIK Prastyabudi (Institut Teknologi TELKOM - Indonesia), Wahyu Andy Adiyanto (Universitas Ahmad Dahlan - Indonesia), Okka Adityo (Universitas Ahmad Dahlan - Indonesia), Luthfi Bagus scheduling production deterministic method Abstract A manufacturing company which its production based on customer's customization order commonly employs Make-To-Order system. The classical problem of this system is that uncertainty of the order receipt schedule and the various degree of customization. Thus, it leads to an improper production schedule or under-optimal. This study aims to analyze the maximum production capacity of the company so that it can provide a recommendation for scheduling improvement. In this paper, the study case is carried out to a company which produces the various tools for military needs, such as weapons, ammunition, and combat vehicle. By means of the deterministic scheduling method, the optimal sequence of a military vehicle can be determined. Then, to represent the job priority order as well as to estimate the job completion duration, the network diagram is used. The result is then used as a reference to construct the production schedule simulation sequentially. It is intended to observe the interval time among production schedule. The experimental results of maximum production capacity calculation show that the company is able to produce at maximum 150 unit vehicles per year.Keywords: scheduling; production; deterministic method; Abstrak Perusahaan manufaktur yang memproduksi berdasarkan kustomisasi permintaan pelanggan biasa menerapkan sistem Make-To-Order. Masalah klasik yang sering dihadapai dari sistem tersebut adalah ketidaktepatan jadwal penerimaan pesanan dan tingkat kustomisasi yang berbeda-beda. Hal tersebut menyebabkan penjadwalan produksi yang tidak tepat atau tidak optimal. Tujuan penelitian ini adalah untuk melakukan analisa kapasitas produksi perusahaan, sehingga dengan mengetahui kapasitas maksimalnya dapat memberikan rekomendasi perbaikan penjadwalan. Dalam penelitian ini, studi kasus dilakukan pada perusahan yang memproduksi berbagai macam peralatan untuk kebutuhan militer seperti persenjataan, amunisi, dan kendaraan tempur. Dengan menggunakan metode penjadwalan deterministik, urutan perakitan optimal pada kendaraan militer dapat ditentukan. Kemudian untuk menggambarkan urutan prioritas pekerjaan sekaligus untuk memperhitungkan durasi penyelesaian pekerjaan digunakan bantuan network diagram. Hasilnya digunakan sebagai dasar untuk menyusun simulasi penjadwalan produksi secara berurutan. Tujuannya adalah untuk mengetahui selisih waktu produksi antar jadwal. Hasil perhitungan jumlah kapasitas produksi maksimal perusahaan didapatkan bahwa perusahaan ini dapat memproduksi sebanyak 150 unit kendaraan per tahun. Kata kunci: penjadwalan; produksi; metode deterministik; Politeknik APP Jakarta 2019-11-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/170 10.30988/jmil.v3i2.170 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 2 (2019): page 94 - 173; 141-154 2598-5795 2622-528X 10.30988/jmil.v3i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/170/pdf Copyright (c) 2019 Wahyu Andy Prastyabudi, Okka Adiyanto, Luthfi Bagus Adityo

oai:ojs.pkp.sfu.ca:article/218 2022-02-18T01:00:08Z JMIL:ART

ANALISIS KEBIJAKAN INVENTORI PADA KOMPONEN DARAH PACKED RED CELL (PRC) Fauzi (Universitas Widyatama - Indonesia), Muchammad Bahagia (Institut Teknologi Bandung - Indonesia), Senator Nur Blood Overstock EOQ Uncertainty Abstract By following WHO guidelines, the minimum blood availability is 2% of the population. The total population of Indonesia in 2016 is 261.115.456, so ideally it takes 5.222.309 blood bags. In 2013-2015 for 36 months, there were 26 overstock events and 10 stockout events. The data shows that the frequency of over-supply is more frequent than over-demand. The high overstock has an impact on the high costs incurred by the City of Bandung PMI, if there is overstock there are two costs to be incurred, namely the cost of storing if the blood is still in good use and the cost of overstock if the blood is more than the expiration date. The purpose of this study was to determine the optimal value of inventory levels to reduce wastage of blood culling due to overstock occurring at PMI Bandung. The research method uses a quantitative approach to the optimization model of inventory policy, namely Uncertainty EOQ. The optimal amount of supplies that must be provided is at intervals of 8,705 - 9,375 blood bags with a large safety stock 403 blood bags and the ordering point is at the level of supplies of 5.706 blood bags. This proposal can provide a total inventory cost savings of Rp6.622.659.034/year. Keywords: Blood, Overstock, EOQ, Uncertainty Abstrak Sesuai dengan panduan WHO, ketersediaan darah minimal adalah 2% dari jumlah penduduk. Jumlah penduduk Indonesia tahun 2016 adalah 261.115.456 jiwa, maka idealnya dibutuhkan 5.222.309 kantong darah. Tahun 2013-2015 selama 36 bulan, terdapat 26 kejadian overstock dan 10 kejadian stoc-kout. Data tersebut menunjukan bahwa frekuensi over-supply lebih sering dibandingkan over-demand. Tingginya overstock berdampak pada tingginya biaya yang dikeluarkan oleh PMI Kota Bandung, jika terjadi overstock ada dua biaya yang harus dikeluarkan, yaitu biaya simpan jika darah masih dalam masa baik digunakan dan biaya overstock jika darah sudah lebih dari tanggal kadaluarsa. Tujuan penelitian ini adalah mengetahui nilai tingkat persediaan yang optimal untuk mengurangi pemborosan pemusnahan darah akibat overstock yang terjadi di PMI Kota Bandung. Metode penelitian menggunakan pendekatan kuantitatif model optimasi pada kebijakan inventori yaitu EOQ Tak Tentu Berisiko Terkendali. Jumlah persediaan optimal yang harus disediakan berada di interval 8.705 – 9.375 kantong darah dengan besar safety stock 403 kantong darah dan titik pemesanan berada di tingkat persediaan 5.706 kantong darah. Usulan ini dapat memberikan penghematan total biaya persediaan sebesar Rp6.622.659.034/tahun. Kata kunci: Darah, Overstock, EOQ, Tak Tentu Politeknik APP Jakarta 2019-11-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/218 10.30988/jmil.v3i2.218 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 2 (2019): page 94 - 173; 94-105 2598-5795 2622-528X 10.30988/jmil.v3i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/218/pdf Copyright (c) 2019 Muchammad Fauzi

oai:ojs.pkp.sfu.ca:article/242 2022-02-18T01:00:08Z JMIL:ART

MODEL ABC MULTI-CRITERIA INVENTORY CLASSIFICATION (MCIC) MENGGUNAKAN PEMROGRAMAN LINEAR PADA PRODUK KIMIA Pratomo (Politeknik APP - Indonesia), Eko ABC Model MCIC Traditional Model Ramanathan-Model Ng-Model Linear Programming Chemical Product. Abstract In order to maintain their inventory efficiently, enterprises need to prioritize inventory policies considering multiple criteria. A Multi Criteria Inventory Classification (MCIC) is one of the most effective techniques widely used to classify inventory. In this paper, multiple criteria (annual value, lead time, cost per unit) are considered on ABC inventory classification. The aim of this study is classify products considering those multiple criteria. Multiple criteria ABC Classifications methodology developed by Ramanathan-Model and Ng-Model are used and compared with traditional method. Data are collected from annual chemical product transaction on PT XYZ during 2018. In this paper, linear programming method is used to solve ABC MCIC Model. The result of this study show that 12 items (14%) are identified as Class A, 26 items (30%) as class B and the remaining 48 items (56%) as C Class. In our conclution, we propose inventory policies based on the result of the ABC Models. Keywords: ABC Model; MCIC; Traditional Model; Ramanathan-Model; Ng-Model; Linear Programming; Chemical Product.Abstrak Dalam mengelola persediaan secara efisien, perusahaan perlu menentukan prioritas pengelolaan persediaan dengan mempertimbangkan beberapa kriteria. Klasifikasi ABC Multi Kriteria (MCIC) merupakan model klasifikasi persediaan barang yang umum digunakan oleh perusahaan dalam mengelola persediaan dalam jumlah besar. Penelitian ini menggunakan multi kriteria berupa nilai total produk, lead time dan biaya per unit. Tujuan penelitian adalah mengelompokan jenis/kelas barang sesuai dengan tingkat kepentingan dengan mempertimbangkan multi kriteria.  Metode Multi kriteria yang telah dikembangkan oleh Ramanathan-Model dan Ng-Model dibandingkan dengan hasil klasifikasi Single criteria ABC (Traditional model). Data yang digunakan adalah data tahunan transaksi produk kimia PT XYZ di tahun 2018. Penyelesaian model ABC multi kriteria (MCIC) dengan pemrograman linear. Terdapat 86 items produk kimia yang diklasifikasikan dengan hasil klasifikasi A sejumlah 12 item (14%), B sejumlah 26 item (30%) dan item C sejumlah 48 item (56%). Pada penelitan ini juga disampaikan kebijakan inventory masing-masing kelas berdasarkan hasil klasifikasi ABC model yang telah dilakukan.Kata Kunci: Model ABC; MCIC; Model tradisional; Model Ramanathan; Model Ng; Pemrograman Linear; Produk kimia. Politeknik APP Jakarta 2019-11-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/242 10.30988/jmil.v3i2.242 Jurnal Manajemen Industri dan Logistik; Vol. 3 No. 2 (2019): page 94 - 173; 106-118 2598-5795 2622-528X 10.30988/jmil.v3i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/242/pdf Copyright (c) 2019 Eko Pratomo

oai:ojs.pkp.sfu.ca:article/245 2023-05-01T15:04:42Z JMIL:ART

ANALISIS PENERAPAN SISTEM MONITORING PEMASOK Hayati (Politeknik APP), Dahliyah Monitoring System Design Supplier monitoring Quality Management AbstractThe performance of suppliers both directly and indirectly determines several critical points for the company such as: product prices, product availability in the market, and product quality. It is very important for companies to monitor and improve the quality of raw materials obtained from suppliers, because this will determine the performance of the company, especially on the quality of products produced. The quality monitoring system implemented in the company must be responsive and consider every critical aspect of the non-conformity that occurs, not only using the Supplier Correction Action Request (SCAR) form or the Vendor Corrective Action Request (VCAR) form or the Supplier Corrective and Preventive Action Request (SCPAR) form for all types of non-conformity found. In this study, samples were taken at 3 different companies in order to obtain valid data to analyze and evaluate the existing quality monitoring system to get a new quality monitoring system that more responsive to avoid repeated findings occur. The research method was conducted by classifying non conformity types based on the level of criticism using the Total Quality Management (TQM) approach, fishbone diagrams, Failure Mode and Effect Analysis (FMEA), and Quality Function Deployment (QFD) so that the quality monitoring system produced is more accurate, effective and efficient in handling raw material non-conformities that occur. AbstrakKinerja pemasok baik secara langsung maupun tidak langsung ikut menentukan beberapa point kritikal bagi perusahaan seperti: harga produk, ketersediaan produk di pasar, dan kualitas produk. Sangat penting bagi perusahaan untuk memonitor dan meningkatkan kualitas bahan baku yang diperoleh dari pemasok, karena hal ini akan menentukan performa bagi perusahaan terutama terhadap kualitas produk yang dihasilkan. Sistem monitoring kualitas yang diterapkan di perusahaan harus responsif dan mempertimbangkan setiap aspek kritikal ketidaksesuaian yang terjadi, tidak bisa hanya menggunakan Supplier Correction Action Request (SCAR) form atau Vendor Corrective Action Request (VCAR) form atau Supplier Corrective and Preventive Action Request (SCPAR) form untuk semua tipe non conformity atau ketidaksesuaian yang ditemukan. Dalam penelitian ini, dilakukan pengambilan sampel  di 3 perusahaan yang berbeda dengan tujuan agar didapatkan data valid guna menganalisis mengenai sistem monitoring kualitas yang telah ada saat ini dan mengevaluasi untuk mendapatkan sistem monitoring kualitas baru yang lebih responsif sehingga tidak terjadi lagi temuan berulang. Metode penelitian dilakukan dengan mengklasifikasikan tipe non conformity berdasarkan tingkat kritikalnya menggunakan pendekatan Total Quality Management (TQM), penggunaan fishbone diagram, Failure Mode and Effect Analysis (FMEA), dan Quality Function Deployment (QFD) sehingga sistem monitoring kualitas yang dihasilkan lebih akurat, efektif dan efisien dalam penanganan ketidaksesuaian bahan baku yang terjadi. Politeknik APP Jakarta 2020-06-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/245 10.30988/jmil.v4i1.245 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95; 27-34 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/245/pdf Copyright (c) 2020 Dahliyah Hayati

oai:ojs.pkp.sfu.ca:article/282 2023-05-01T15:04:42Z JMIL:ART

PENENTUAN LOKASI DISTRIBUTION CENTER DENGAN METODE P-MEDIAN DI PT PERTAMINA EP Fadhil (Universitas Pertamina), Raihan Ahmad Prabowo (PT. Pertamina EP), Eko Gito Redi (Universitas Pertamina), A. A. N. Perwira distribution centre p-median facility location problem AbstractGlobal energy consumption increases every year. BP Statistics Review of World Energy 2019 shows that Indonesia's energy consumption increases by 4.9% in 2018, reaching 185.5 million tons of oil equivalent (TOE). Therefore, oil and gas companies must increase production to fulfill those needs. PT Pertamina EP is a subsidiary of PT Pertamina (Persero) which focuses on the upstream oil and gas sector. One of the activities carried out in the upstream business is drilling. Drilling materials are necessary to support the dynamic of drilling process. The mechanism used when there is a shortage of stock is to send the required material from another field that has the required material, or is called Inter Unit Assistance (BAU). In 2018 the costs incurred for transportation of BAU OCTG (Oil Country Tubular Goods) material amounted to Rp 45,733,340,000. Distribution center is an alternative for cutting distribution chains. We proposed allocation of facility such distribution center location decision using p-median optimization model to reduce the BAU transportation cost. This approach is implemented using math programming using AMPL and Gurobi.  Distribution center functions as a material distribution center to meet the needs of the surrounding fields. By applying the scenario of building a distribution center, transportation costs can be reduced by 13% or Rp 6,167,325,000. AbstrakKonsumsi energi global cenderung meningkat setiap tahunnya. Data BP Statistical Review of World Energy 2019 menunjukkan konsumsi energi Indonesia meningkat sebesar 4,9% pada tahun 2018 dengan nilai mencapai 185,5 juta tonnes oil equivalent (TOE). Oleh karena itu perusahaan minyak dan gas bumi (migas) harus meningkatkan produksi untuk memenuhi kebutuhan tersebut. PT Pertamina EP adalah perusahaan yang fokus pada sektor hulu migas. Salah satu kegiatan yang dilakukan pada bisnis hulu adalah pemboran. Untuk Rencana pengeboran yang dinamis dibutuhkan ketersediaan material. Mekanisme yang dilakukan saat terjadi kekurangan stock adalah mengirim material yang dibutuhkan dari field lain yang memiliki ketersediaan material yang dibutuhkan, atau disebut Bantuan Antar Unit (BAU). Biaya yang dikeluarkan pada tahun 2018 untuk transportasi BAU material OCTG (Oil Country Tubular Goods) sebesar Rp 45.733.340.000. Biaya tersebut dibutuhkan untuk mendistribusikan material pada lokasi field yang tersebar di berbagai lokasi di pulau Jawa, Sumatera, dan Kalimantan. Dalam penelitian ini diusulkan untuk memanfaatkan penggunaan distribution center (DC) sebagai upaya untuk menghemat biaya transportasi BAU. DC berfungsi sebagai pusat distribusi material untuk memenuhi kebutuhan field di sekitarnya. Model optimasi p-median digunakan memilih lokasi fasilitas DC yang memiliki biaya transportasi paling minimal dengan mempertimbangkan jarak, biaya, dan permintaan material. Diasumsikan satu DC akan ditempatkan di setiap wilayah / pulau. Solusi optimal dari model p-median dihasilkan menggunakan software pemrograman matematis AMPL dengan menggunakan solver GUROBI. Hasil eksperimen didapatkan bahwa dengan penerapan skenario adanya DC, biaya transportasi dapat dipangkas sebesar 13% atau sebesar Rp 6.167.325.000. Politeknik APP Jakarta 2020-06-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/282 10.30988/jmil.v4i1.282 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95; 01-09 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/282/pdf Copyright (c) 2020 Raihan Ahmad Fadhil, Eko Gito Prabowo, Anak Agung Perwira Ngurah Redi

oai:ojs.pkp.sfu.ca:article/284 2023-05-01T15:04:42Z JMIL:ART

PENGARUH IMPOR BAHAN BAKU DAN KOMPLEKSITAS PRODUK TERHADAP PRODUKTIVITAS PERUSAHAAN Oktaviani (Universitas Indonesia), Sirma Djamaluddin (Universitas Indonesia), Sartika ABSTRACTThe effect of import liberalization on industrial productivity can occur through increased access to inputs and technology transfer to imported products. Another factor that can affect productivity is product complexity. The calculation results of the 2010-2014 Product Complexity Index (PCI) based on the concept of diversity and ubiquity, showed the average 3-digit PCI ISIC was 0.0946 with a minimum value of -2.1324 and a maximum of 2.2157. This study aims to look at the effect of imported raw materials on the productivity of companies that produce more complex products. By using the 2010-2014 Large and Medium Industry Survey data and involving the firm's fixed effects and time, empirical results show that imports of raw materials significantly affect the productivity of companies that produce complex products by -0.0405. In addition, it is known that the manufacturing industry takes approximately one year to absorb technology in complex products so as to increase firm productivity. Firm-level productivity is calculated based on the Levinshon-Petrin (2003) estimated productivity to control selection and simultaneity bias.ABSTRAK Efek liberalisasi impor terhadap produktivitas industri dapat terjadi melalui peningkatan akses input serta transfer teknologi pada produk impor. Faktor lainnya yang dapat mempengaruhi produktivitas adalah kompleksitas produk.  Hasil perhitungan Product Complexity Index (PCI) 2010-2014 berdasarkan konsep keragaman dan ubiquity, menunjukkan rata-rata PCI ISIC 3 digit adalah 0.0946 dengan nilai minimum -2.1324 dan maksimum 2.2157. Penelitian ini bertujuan untuk melihat pengaruh impor bahan baku terhadap produktivitas perusahaan yang lebih banyak menghasilkan produk kompleks. Dengan menggunakan data Survei Industri Besar dan Sedang tahun 2010-2014  serta melibatkan efek tetap perusahaan dan waktu, hasil empiris menunjukkan impor bahan baku mempengaruhi produktivitas perusahaan yang menghasilkan produk kompleks secara signifikan sebesar -0.0405. Selain itu, diketahui bahwa industri manufaktur memerlukan waktu kira-kira satu tahun untuk menyerap teknologi pada produk kompleks sehingga dapat meningkatkan produktivitas perusahaan. Produktivitas level perusahaan dihitung berdasarkan estimasi produktivitas Levinshon-Petrin untuk mengendalikan bias seleksi dan simultanitas.  Politeknik APP Jakarta 2020-06-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/284 10.30988/jmil.v4i1.284 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95; 10-26 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/284/pdf Copyright (c) 2020 Sirma Oktaviani

oai:ojs.pkp.sfu.ca:article/311 2023-05-01T15:04:42Z JMIL:ART

ANALISA PERBANDINGAN METODE SIMULATED ANNEALING DAN LARGE NEIGHBORHOOD SEARCH UNTUK MEMECAHKAN MASALAH LOKASI DAN RUTE KENDARAAN DUA ESELON (Universitas Singaperbangsa Karawang), Winarno Redi (Universitas Pertamina), A. A. N. Perwira Two-Echelon Location Routing Problem Simulated Annealing Large Neighborhood Search AbstractTwo-echelon location routing problem (2E-LRP) is a problem that considers distribution problem in a two-level / echelon transport system. The first echelon considers trips from a main depot to a set of selected satellite. The second echelon considers routes to serve customers from the selected satellite. This study proposes two metaheuristics algorithms to solve 2E-LRP: Simulated Annealing (SA) and Large Neighborhood Search (LNS) heuristics. The neighborhood / operator moves of both algorithms are modified specifically to solve 2E-LRP. The proposed SA uses swap, insert, and reverse operators. Meanwhile the proposed LNS uses four destructive operator (random route removal, worst removal, route removal, related node removal, not related node removal) and two constructive operator (greedy insertion and modived greedy insertion). Previously known dataset is used to test the performance of the both algorithms. Numerical experiment results show that SA performs better than LNS. The objective function value for SA and LNS are 176.125 and 181.478, respectively. Besides, the average computational time of SA and LNS are 119.02s and 352.17s, respectively.AbstrakPermasalahan penentuan lokasi fasilitas sekaligus rute kendaraan dengan mempertimbangkan sistem transportasi dua eselon juga dikenal dengan two-echelon location routing problem (2E-LRP) atau masalah lokasi dan rute kendaraan dua eselon (MLRKDE). Pada eselon pertama keputusan yang perlu diambil adalah penentuan lokasi fasilitas (diistilahkan satelit) dan rute kendaraan dari depo ke lokasi satelit terpilih. Pada eselon kedua dilakukan penentuan rute kendaraan dari satelit ke masing-masing pelanggan mempertimbangan jumlah permintaan dan kapasitas kendaraan. Dalam penelitian ini dikembangkan dua algoritma metaheuristik yaitu Simulated Annealing (SA) dan Large Neighborhood Search (LNS). Operator yang digunakan kedua algoritma tersebut didesain khusus untuk permasalahan MLRKDE. Algoritma SA menggunakan operator swap, insert, dan reverse. Algoritma LNS menggunakan operator perusakan (random route removal, worst removal, route removal, related node removal, dan not related node removal) dan perbaikan (greedy insertion dan modified greedy insertion). Benchmark data dari penelitian sebelumnya digunakan untuk menguji performa kedua algoritma tersebut. Hasil eksperimen menunjukkan bahwa performa algoritma SA lebih baik daripada LNS. Rata-rata nilai fungsi objektif dari SA dan LNS adalah 176.125 dan 181.478. Waktu rata-rata komputasi algoritma SA and LNS pada permasalahan ini adalah 119.02 dan 352.17 detik. Politeknik APP Jakarta 2020-06-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/311 10.30988/jmil.v4i1.311 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95; 35-46 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/311/pdf Copyright (c) 2020 Winarno Winarno, Anak Agung Ngurah Perwira Redi

oai:ojs.pkp.sfu.ca:article/324 2023-05-01T15:04:42Z JMIL:ART

PEMECAHAN MASALAH KEMACETAN LALU LINTAS DI PEREMPATAN SUKARNO HATTA – BUAH BATU BANDUNG DENGAN METODE SIMULASI KOMPUTER Triwibisono (TELKOM University), Christanto Aurachman (TELKOM University), Rio Traffic jam Computer simulation Pro Model AbstractThis paper proposes a solution to the problem of congestion at the Sukarno Hatta Intersection - Buah Batu Bandung by using a computer simulation method with Pro Model software. There are three alternative solutions to this problem, namely changing the duration of traffic lights, adding new road lanes, or making flyovers. Changing the duration of the traffic lights will only reduce the car's travel time from an average of 10.5 minutes to 8.9 minutes (85% of the previous travel time). Adding one lane to each road will only reduce the vehicle's travel time from an average of 10.5 minutes to 7.7 minutes (73% of the previous travel time). The construction of a one-way flyover on Jalan Sukarno Hatta is the best solution, because it reduce the vehicle travel timefrom an average of 10.3 minutes to 3.2 minutes. Significant changes have occurred, the travel time is only 32% of the previous travel time. AbstrakMakalah ini mengusulkan solusi atas masalah kemacetan di Perempatan Sukarno Hatta – Buah Batu Bandung dengan menggunakan metode simulasi komputer dengan perangkat lunak Pro Model. Ada tiga alternatif solusi masalah ini yaitu mengubah durasi lampu merah dan hijau, menambah jalur jalan baru, atau membuat jalan layang. Pengubahan durasi lampu merah dan hijau hanya akan mengurangi waktu tempuh mobil dari rata-rata 10,5 menit menjadi 8,9 menit (85% dari waktu tempuh  sebelumnya). Penambahan satu jalur pada setiap jalan hanya akan mengurangi waktu tempuh kendaraan dari rata-rata 10,5 menit menjadi 7,7 menit (73% dari waktu tempuh sebelumnya). Pembuatan jalan layang satu arah di Jalan Sukarno Hatta merupakan solusi terbaik, karena mengurangi waktu tempuh kendaraan untuk dari rata-rata 10,3 menit menjadi 3,2 menit. Terjadi perubahan signifikan, waktu tempuh tinggal 32% dari waktu tempuh sebelumnya. Politeknik APP Jakarta 2020-06-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/324 10.30988/jmil.v4i1.324 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95; 75-83 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/324/295 https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/324/pdf Copyright (c) 2020 Rio Aurachman

oai:ojs.pkp.sfu.ca:article/372 2023-05-01T15:04:42Z JMIL:ART

PENENTUAN LOKASI EXTERNAL WAREHOUSE DENGAN MENGGUNAKAN METODE CENTER OF GRAVITY (STUDI KASUS DI PT. RPZ SURABAYA) soesilo (Sekolah Tinggi Teknologi Mutu Muhammadiyah), Rahman Firmansyah (Sekolah Tinggi Teknologi Mutu Muhammadiyah), Yahdi (Sekolah Tinggi Teknologi Mutu Muhammadiyah), Sartono Location External Warehouse Center of Gravity Supply Chain AbstractDetermination of the External Warehouse location has a vital role in the Supply Chain Management system to facilitate the delivery process to consumers who can run smoothly, quickly, and the most optimum distance. The company needs to build a new external warehouse because the current warehouse will be used for new machine installations. Therefore, it was decided to create an alternative external warehouse outside the factory. The purpose of this study is to determine the optimum location of the external warehouse to be made. This study uses the Center of Gravity method to calculate the optimal area that will be considered by the location between the distribution of consumer locations and the number of shipments and also consider the size of the factory that will supply the product. Based on the results of this study, calculations using the Center of Gravity method found that the location of the external warehouse chosen was at (-7.328293, 112.7420916), the settlement area of Jemur Wonosari, Wonocolo, Surabaya City, East Java. By determining the exact location of the external warehouse, the company will benefit from the efficiency of transportation costs.AbstrakPenentuan lokasi gudang eksternal memiliki peran penting dalam sistem Manajemen Rantai Pasokan untuk memfasilitasi proses pengiriman kepada konsumen sehingga proses produk dapat terkirim dengan lancar, cepat dan jarak yang paling optimal. Perusahaan saat ini membutuhkan gudang eksternal karena area gudang yang ada akan digunakan untuk instalasi mesin baru. Oleh karena itu, diputuskan untuk membuat alternatif gudang eksternal di luar pabrik. Tujuan dari penelitian ini adalah untuk menentukan lokasi gudang eksternal yang paling optimal untuk dibuat. Penelitian ini menggunakan metode Center of Gravity untuk menghitung lokasi optimal yang sesuai dengan lokasi antara lokasi konsumen dan jumlah pengiriman dan juga mempertimbangkan lokasi pabrik yang akan memasok produk. Dari hasil penelitian ini, perhitungan menggunakan metode Center of Gravity menemukan bahwa lokasi gudang eksternal yang dipilih berada di (-7.328293, 112.7420916), yaitu daerah Jemur Wonosari, Wonocolo, Kota Surabaya, Jawa Timur. Dengan menentukan lokasi yang tepat dari gudang eksternal, perusahaan akan mendapat manfaat dari efisiensi biaya transportasi.  Politeknik APP Jakarta 2020-06-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/372 10.30988/jmil.v4i1.372 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95; 58-66 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/372/pdf Copyright (c) 2020 Rahman soesilo

oai:ojs.pkp.sfu.ca:article/419 2023-05-01T15:04:42Z JMIL:ART

KAJIAN MODEL DESAIN APLIKASI MOBILE YANG BERKELANJUTAN PADA DESA WISATA As'adi (UPN Veteran Jakarta), Muhamad Zaman (UPN Veteran Jakarta), Akhmad Nidhomuz Dewi (UPN Veteran Jakarta), Alina Cynthia Viacenza (UPN Veteran Jakarta), Arraz Naoval Montreano (UPN Veteran Jakarta), Donny AHP Comparison Digitalization Model Design Application QFD AbstractThe 4.0 industrial revolution created opportunities for MSMEs in rural areas to build and develop marketing networks on a wide and efficient scale. Applying digitization in a village will have an impact on the potential of what is not yet known in general. This study discusses the design of Android applications that are expected to provide new experiences to visitors to find out the potential of the village that has not been exposed. The contribution of this research is to examine the application design model that evaluates in two villages with different cultures and potentials, namely Ponggok Klaten Village and Kadubungbang Pandeglang Village. The results of QFD and AHP can help applications that are flexible to the village as well as visitor application needs and application priority features. Of the different features, because there are indeed differences between villages with different topography.AbstrakRevolusi industri 4.0 menciptakan peluang bagi UMKM di daerah pedesaan untuk dapat membangun dan mengembangkan jaringan pemasaran pada skala yang luas dan efisien. Penerapan digitalisasi pada suatu Desa akan memberikan dampak luias terhadap potensi apa yang belum diketahui secara umum. Penelitian ini bertujuan untuk mengusulkan desain aplikasi android yang diharapkan dapat memberikan pengalaman baru kepada para pengunjung untuk mengetahui potensi desa yang belum terekspos. Kontribusi dari penelitian ini adalah untuk mempelajari perbandingan pada desain model aplikasi yang dievaluasi pada dua desa dengan budaya dan potensi yang berbeda, yaitu Desa Ponggok Klaten dan Desa Kadubungbang Pandeglang. Hasil QFD dan AHP dapat diketahui bahwa aplikasi bersifat fleksibel terhadap penerapan dua desa serta prioritas kebutuhan pengunjung dan fitur prioritas aplikasi. Hasil erbandingan terdapat kesamaan dalam kebutuhan pelanggan dan perbedaan dalam desain fitur, karena kedua desa memiliki budaya dan topografi yang berbeda. Politeknik APP Jakarta 2020-06-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/419 10.30988/jmil.v4i1.419 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95; 47-57 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/419/abstract%20only Copyright (c) 2020 Akhmad Nidhomuz Zaman

oai:ojs.pkp.sfu.ca:article/430 2023-05-01T15:04:42Z JMIL:ART

PENENTUAN LETAK GUDANG UNTUK MEMINIMKAN BIAYA TRANSPORTASI DENGAN PENDEKATAN CENTER OF GRAVITY Iqbal (Universitas Widyatama), Muhammad Rafi Hasan (Universitas Widyatama), Ismail Gusmon (Universitas Widyatama), Aldri Satria Center of Gravity Cost Minimization Distance Abstract To meet the rapid demand for pharmaceutical drugs, a new warehouse is needed to distribute to various cities in West Java. This research at PT. Kimia Farma has the aim of determining the location of a new warehouse that is efficient and effective in minimizing the transportation costs of PT. Kimia Farma Plant Bandung to the location of distribution in West Java. The current conditions with warehouses in the city of Bandung prove that transportation costs at the company are very large, due to the distance from the old warehouse to the distributors. In this study, the Center of Gravity method is used to determine the location of the warehouse. The design of this research is a case study in the area of West Java with data collection methods such as interviews and using CorelDraw software to create a Cartesian diagram. The calculation results obtained using the center of gravity method for the location of the new warehouse located in Subang with coordinate points (18.36). With the new warehouse location, it can minimize transportation costs as much as Rp. 481,192 with a percentage reduction of 6.76% and the distance from the initial warehouse in Bandung to Subang and then to all distribution destinations, which is 43 km closer after the addition of new warehouses. and has a decreased percentage of 6.91%. Abstrak Untuk memenuhi permintaan obat-obatan farmasi yang cepat, maka dibutuhkan letak gudang baru untuk mendistribusikan ke berbagai kota di Jawa Barat. Penelitian pada PT.Kimia Farma ini memiliki tujuan menentukan letak gudang baru yang efisien serta efektif dalam meminimkan biaya transportasi PT.Kimia Farma Plant Bandung ke letak distribusi di Jawa Barat. Kondisi saat ini dengan gudang di Kota Bandung membuktikan pengeluaran biaya transportasi pada perusahaan sangatlah besar, dikarenakan adanya jarak tempuh yang jauh dari gudang lama menuju para distributor. Dalam penelitian, digunakan metode center of gravity dalam mentukan letak gudang. Desain penelitian ini berupa studi kasus wilayah jawa barat dengan metode pengumpulan data berupa wawancara serta menggunakan software CorelDraw untuk membuat diagram kartesius. Hasil perhitungan yang diperoleh menggunakan metode center of gravity untuk letak gudang baru berletak di Subang dengan titik koordinat (18,36). Dengan adanya letak gudang yang baru maka, dapat meminimkan biaya transportasi sebesar Rp.481.192 dengan persentase penurunan sebesar 6,76% dan jarak tempuh dari gudang awal di Bandung menuju Subang lalu menuju semua tujuan distribusinya yakni sebesar 43 km lebih dekat setelah adanya penambahan gudang baru dan memiliki presentase penurunan sebesar 6,91%. Politeknik APP Jakarta 2020-06-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/430 10.30988/jmil.v4i1.430 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95; 67-74 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/430/pdf Copyright (c) 2020 Muhammad Rafi Iqbal

oai:ojs.pkp.sfu.ca:article/434 2022-02-18T01:03:01Z JMIL:ART

PERANCANGAN SISTEM INFORMASI BASIS DATA INVENTARIS BARANG BERBASIS WEB MENGGUNAKAN MODEL WATERFALL Wahyuni (Universitas Sultan Ageng Tirtayasa), Nuraida Akmal (Universitas Sultan Ageng Tirtayasa), Rizki Gunawan (Universitas Sultan Ageng Tirtayasa), Akbar Barang inventaris Basis data Desain Model Waterfall AbstractGood inventory management requires support from a database information system. The problem that occurs in the Untirta Industrial Engineering laboratory is that the inventory management system is still traditional method, that is data recording is done individually so that the existing data overlaps and results in invalid information. The purpose of this research is to design a database information system. The Waterfall model is used for design. This method consists of the analysis phase, the design phase, the implementation phase, the test phase and the maintenance phase. The results obtained from the analysis phase are the functional requirements for logging in users and data engineering requirements such as add, view, delete. The design phase uses DFD and ERD. Based on the context diagram, the external agents involved are the admin (head of the laboratory) and user (laboratory assistant). The design results that have been implemented through a web-based interface are then tested using a blackbox test and usability test. The test results state a value of 86% which means the results are in very good classification.AbstrakPengelolaan barang inventaris yang baik membutuhkan dukungan dari sistem informasi basis data. Masalah yang terjadi di laboratorium jurusan Teknik Industri Untirta adalah sistem pengelolaan barang inventaris masih bersifat tradisional, yaitu pencatatan yang dilakukan sendiri-sendiri sehingga data yang ada tumpang tindih dan menghasilkan informasi yang kurang valid. Tujuan dari penelitian ini adalah merancang sistem informasi basis data. Model Waterfall digunakan untuk perancangan. Metode ini terdiri dari tahap analisis, tahap desain, tahap implementasi, tahap uji dan tahap pemeliharaan. Hasil yang didapatkan dari tahap analisis adalah adanya kebutuhan fungsional untuk log in user dan kebutuhan rekayasa data seperti tambah, lihat, hapus. Tahap desain menggunakan DFD dan ERD. Berdasarkan diagram konteks, agen eksternal yang terlibat adalah admin (kepala laboratorium) dan user (asisten laboratorium). Hasil desain yang telah diimplementasikan melalui tampilan antar-muka berbasis web kemudian diuji menggunakan uji blackbox dan uji usability. Hasil uji menyatakan nilai sebesar 86% yang berarti hasil berada dalam klasifikasi sangat baik. Politeknik APP Jakarta 2021-01-18 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/434 10.30988/jmil.v4i2.434 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 2 (2020): page 84 - 168; 102-115 2598-5795 2622-528X 10.30988/jmil.v4i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/434/pdf Copyright (c) 2020 Nuraida Wahyuni, Rizki Akmal, Akbar Gunawan

oai:ojs.pkp.sfu.ca:article/448 2022-02-18T01:03:01Z JMIL:ART

MODIFIKASI MANAJEMEN INVENTORI GUDANG DALAM IMPLEMENTASI LEAN WAREHOUSING: SEBUAH STUDI KASUS PADA INDUSTRI FMCG Wibowo (Universitas Lambung Mangkurat), Alan Dwi Manajemen Inventori FMCG Waste Lean Warehousing AbstractThe warehouse performance in serving the production department is a top priority to realize the production schedule set by the companies as a response to the market. Market uncertainty is an essential factor that needs to be considered to ensure the sustainability of production activities. Excellent performance in warehouse management will help reduce the impact of risks caused by uncertainty. Thus, it is necessary to make continuous improvements in warehouse management so that its performance will be better. This research aims to formulate practical tactics that can be used by warehouse operators to improve warehouse performance, which is leaner, more productive, and more efficient. The FMCG (fast-moving consumer goods) industry was chosen as the case study in this research. The approach used is a modification of the material classification and changes in material layout. This study presents a significant difference in reducing the time spent on non-value-added activities. This research succeeded in reducing the portion of time used for non-value added activities (waste). AbstrakRevolusi industri 4.0 menciptakan peluang bagi UMKM di daerah pedesaan untuk dapat membangun dan mengembangkan jaringan pemasaran pada skala yang luas dan efisien. Penerapan digitalisasi pada suatu Desa akan memberikan dampak luias terhadap potensi apa yang belum diketahui secara umum. Penelitian ini bertujuan untuk mengusulkan desain aplikasi android yang diharapkan dapat memberikan pengalaman baru kepada para pengunjung untuk mengetahui potensi desa yang belum terekspos. Kontribusi dari penelitian ini adalah untuk mempelajari perbandingan pada desain model aplikasi yang dievaluasi pada dua desa dengan budaya dan potensi yang berbeda, yaitu Desa Ponggok Klaten dan Desa Kadubungbang Pandeglang. Hasil QFD dan AHP dapat diketahui bahwa aplikasi bersifat fleksibel terhadap penerapan dua desa serta prioritas kebutuhan pengunjung dan fitur prioritas aplikasi. Hasil erbandingan terdapat kesamaan dalam kebutuhan pelanggan dan perbedaan dalam desain fitur, karena kedua desa memiliki budaya dan topografi yang berbeda. Politeknik APP Jakarta 2021-01-18 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/448 10.30988/jmil.v4i2.448 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 2 (2020): page 84 - 168; 116-129 2598-5795 2622-528X 10.30988/jmil.v4i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/448/pdf Copyright (c) 2020 Alan Dwi Wibowo

oai:ojs.pkp.sfu.ca:article/467 2022-02-18T01:03:20Z JMIL:ART

KEPUASAN KONSUMEN DI INDUSTRI SUVENIR DALAM PERSPEKTIF E-COMMERCE DAN KUALITAS LAYANAN Prasetiyo (Universitas Nasional Pasim), Budi AbstractThis research was conducted on XYZ Souvenir consumers. The purpose of this research is to determine how much the contribution of the use of E-commerce and Service Quality affects customer satisfaction both partially and simultaneously on XYZ Souvenir.  The research method that will be used in this research is the verification method. In this research, the unit of analysis is individuals, namely XYZ Souvenir consumers. The sample in this study was 134 respondents. Systematic random sampling is a sampling withdrawal technique used in this study. The analysis method uses path analysis, while also testing the validity and reliability of the research instrument. Based on the results of the study indicate that there is an effect both partially and simultaneously on exogenous variables (E-commerce and Service Quality) on endogenous variables (customer satisfaction). The implication of this research that XYZ Souvenir can make various improvements a good site design (such as information on goods/services that are complete and clear, there are promotions such as giving discounts, and special offers, accepting proposals from consumers payment features used, making online promotions) and adding product variations. Politeknik APP Jakarta 2021-02-03 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/467 10.30988/jmil.v5i1.467 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 1 (2021): page 01 - 74; 10-18 2598-5795 2622-528X 10.30988/jmil.v5i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/467/pdf Copyright (c) 2021 Budi Prasetiyo

oai:ojs.pkp.sfu.ca:article/472 2022-02-18T01:03:01Z JMIL:ART

OPTIMASI PENYUSUNAN BARANG DALAM RANGKA MENINGKATKAN UTILITAS AKTIVITAS LOADING MENGGUNAKAN SOFTWARE CUBE IQ DI PT.ASR Wardani (Universitas Widyatama), Sri Mulyadi (Universitas Widyatama), Namun Anggraeni (Universitas Widyatama), Nitta Fitria Loading Activity Arrangement of goods Software Cube IQ AbstractLoading into containers must consider the level of efficient use of container space. The use of empty space and the arrangement of goods in containers that have not been optimal are problems in the process of loading goods. In this regard, the plan for the preparation of goods to be made by researchers is assisted with a software that will facilitate the optimal arrangement of goods arranged in containers. The parameters are reviewed from the aspect of purpose, weight, volume, and type of goods to see whether the optimal use of goods. Cube IQ became the software chosen to help implement the system in this study by determining the coordinates and 3D visualization of the arrangement of goods in containers. Goods data and container data become the data used in the simulation process. Dimensions (length, width, height) define the required item data. While dimensions (maximum weight and volume of containers) defines the required container data. After simulating the Cube IQ software there was an increase in the use of container capacity by 88.35% while manually only 87.91%. The implication is a decrease in distribution costs per unit, which is 0.5%. The optimization results obtained are expected to be able to provide input in making decisions determining the optimal arrangement of goods and fleet numbers.AbstrakPemuatan ke dalam kontainer harus mempertimbangkan tingkat efisiensi penggunaan ruang kontainer. Penggunaan ruang kosong dan penyusunan barang dalam kontainer yang belum optimal menjadi permasalahan proses muat barang. Berkaitan dengan hal itu, rencana penyusunan barang yang akan dibuat oleh peneliti dibantu dengan suatu perangkat lunak yang akan memudahkan simulasi penataan barang yang optimal pada kontainer. Parameter ditinjau dari aspek tujuan, berat, volume, dan jenis barang untuk melihat optimal tidaknya penyusunan barang. Cube IQ menjadi software yang dipilih untuk membantu mengimplementasikan sistem dalam penelitian ini dengan penentuan titik koordinat dan visualisasi 3D penataan barang pada kontainer. Data barang dan data kontainer menjadi data yang digunakan pada proses simulasi. Dimensi (panjang, lebar, tinggi) mendefinisikan data barang yang diperlukan. Sementara dimensi (berat dan volume maksimum kontainer) mendefiniskan data kontainer yang diperlukan. Setelah dilakukan simulasi dengan software Cube IQ terdapat peningkatan penggunaan kapasitas kontainer sebesar 88,35% sedangkan secara manual hanya 87,91%. Implikasinya terjadi penurunan biaya distribusi per unit yaitu sebesar 0,5% Hasil optimasi yang diperoleh diharapkan mampu memberi masukan dalam pengambilan keputusan menentukan penyusunan barang dan jumlah armada yang optimal Politeknik APP Jakarta 2021-01-18 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/472 10.30988/jmil.v4i2.472 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 2 (2020): page 84 - 168; 130-137 2598-5795 2622-528X 10.30988/jmil.v4i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/472/pdf Copyright (c) 2020 Sri Wardani

oai:ojs.pkp.sfu.ca:article/510 2022-02-18T01:03:01Z JMIL:ART

EVALUASI KEBIJAKAN PERSEDIAAN BAHAN BAKU KANTONG SEMEN UNTUK MENGURANGI BIAYA PERSEDIAAN (Studi Kasus: PT. SOLUSI BANGUN INDONESIA TBK). Arif (Universitas Pertamina), Zahra Zayyina Yustisia Sukarno (Universitas Pertamina), Iwan EOQ POQ Min - Max Forecasting Safety Stock AbstractThis study aims to evaluate company policy in determining raw material ordering rates which are then compared with the EOQ, POQ, and Min-Max methods. This research uses a quantitive case study method using data obtained from the company. Forecasting is done using WinQSB and MAD, MSE and MAPE software for forecasting accuracy. Based on data processing, the data shows the horizontal pattern and the chosen forecasting method is the Simple Average method. Research shows the EOQ method has an order quantity of 1192 units / order with an order frequency of 11 times a year and has the smallest total inventory cost of the three methods compared which is Rp 269,520,852,781 or almost 50% lower than the total costs incurred by the company using the current method. ROP point has a value of 3395 units with a safety stock value of 106 units.AbstrakPenelitian ini bertujuan untuk mengevaluasi kebijakan perusahaan dalam menentukan tingkat pemesanan bahan baku yang kemudian dibandingkan dengan metode EOQ, POQ dan Min-Max. Penelitian ini menggunakan metode studi kasus kuantitatif dengan menggunakan data yang diperoleh dari perusahaan. Peramalan dilakukan menggunakan perangkat lunak WinQSB dan MAD, MSE dan MAPE untuk akurasi peramalan. Berdasarkan pengolahan data, data menunjukkan pola horizontal dan metode peramalan yang dipilih adalah metode Simple Average. Penelitian ini menunjukkan metode EOQ memiliki jumlah pesanan 1192 unit / pesanan dengan frekuensi pemesanan 11 kali setahun dan memiliki total biaya persediaan terkecil dari ketiga metode yang dibandingkan yaitu Rp 269.520.852 atau hampir 50% lebih rendah dari total biaya yang dikeluarkan oleh perusahaan dengan metode saat ini. Titik ROP memiliki nilai 3395 unit dengan nilai stok pengaman 106 unit. Politeknik APP Jakarta 2021-01-18 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/510 10.30988/jmil.v4i2.510 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 2 (2020): page 84 - 168; 138-145 2598-5795 2622-528X 10.30988/jmil.v4i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/510/pdf Copyright (c) 2020 Zahra Zayyina Yustisia Arif, Iwan Sukarno

oai:ojs.pkp.sfu.ca:article/515 2023-05-01T15:04:42Z JMIL:ART

Daftar Isi Isi, Daftar DAFTAR ISI VOL. 04. NO. 01. MEI 2020 Politeknik APP Jakarta 2020-06-12 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/515 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/515/67 Copyright (c) 2020 Daftar Isi

oai:ojs.pkp.sfu.ca:article/516 2023-05-01T15:04:42Z JMIL:ART

Pengantar Redaksi Redaksi, Pengantar Pengantar Redaksi Politeknik APP Jakarta 2020-06-12 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/516 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 1 (2020): page 84 - 95 2598-5795 2622-528X 10.30988/jmil.v4i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/516/68 Copyright (c) 2020 Pengantar Redaksi

oai:ojs.pkp.sfu.ca:article/542 2022-02-18T01:03:20Z JMIL:ART

PENENTUAN RUTE DISTRIBUSI PALLET MESH MENGGUNAKAN METODE SAVING MATRIX (STUDI KASUS : PT. MMM) Nasution (Universitas Singaperbangsa), Fery Darus S (Universitas Singaperbangsa), Ade Momon Fitriani (Universitas Singaperbangsa), Risma Distribusi Saving Matrix dan Nearest Neighbor AbstractDistribution of products from the company's warehouse PT. MMM to consumers so far the company only uses estimates of consumers which will be passed in one shipment only by looking at the number of requests without considering the shipping routes and distance from the warehouse to the location of the consumer. This study aims to determine an effective shipping route using the saving matrix and nearest neighbor methods then find out distance savings and transportation cost savings. Comparison of the product distribution routes of PT. MMM after using the saving matrix method and the nearest neighbor method results in an effective and efficient route where the initial distribution route is 40 routes into 7 routes for 7 days of product distribution to consumers. The saving matrix method is applied. shows a reduction in the distance of the original shipment of 1,673.6 Km to 810.7 Km, thus obtained a savings of a distance of 862.9 Km. As well as a significant reduction in transportation costs where the initial cost of transportation of Rp. 4,478,448.- dropped to Rp. 3,675,951.-, so the company can save on transportation costs by Rp. 802,497.-.AbstrakRute pendistribusian produk dari gudang perusahaan PT. MMM  ke para konsumen  selama ini perusahaan hanya menggunakan perkiraan konsumen mana yang akan dilalui dalam satu kali pengiriman, yaitu hanya dengan melihat jumlah permintaan tanpa mempertimbangkan rute pengiriman dan jarak tempuh dari gudang ke lokasi konsumen. Penelitian ini bertujuan untuk menentukan rute pengiriman yang efektif menggunakan metode saving matrix dan nearest neighbor, kemudian mengetahui penghematan jarak serta penghematan biaya transportasi. Perbandingan rute distribusi produk PT. MMM dengan menggunakan metode saving matrix dan metode nearest neighbor menghasilkan rute yang efektif dan efisien dimana rute awal distribusi sebanyak 40 rute menjadi 7 rute untuk 7 hari pendistribusian produk ke konsumen. Dengan diterapkannya metode saving matrix menunjukan penurunan jarak tempuh pengiriman yang semula 1.673,6 Km menjadi 810,7 Km, dengan demikian didapatkan penghematan jarak sebesar 862,9 Km. Serta menurunkan biaya transportasi yang signifikan dimana biaya awal transportasi sebesar Rp. 4.478.448.- turun menjadi Rp. 3.675.951.-, sehingga perusahaan dapat menghemat biaya transportasi sebesar Rp. 802.497 Politeknik APP Jakarta 2021-05-25 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/542 10.30988/jmil.v5i1.542 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 1 (2021): page 01 - 74; 01-09 2598-5795 2622-528X 10.30988/jmil.v5i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/542/pdf Copyright (c) 2021 Fery Darus Nasution, Ade Momon S, Risma Fitriani

oai:ojs.pkp.sfu.ca:article/544 2022-02-18T01:03:01Z JMIL:ART

KONSENTRASI SPASIAL, AGLOMERASI DAN PRODUKTIVITAS PERUSAHAAN INDUSTRI MANUFAKTUR INDONESIA Wardani (Universitas Indonesia), Kusuma Yudhistira (Universitas Indonesia), Muhammad Halley Agglomeration Total Factor Productivity AbstractThis study aims to analyze the impact of agglomeration in the form of localization economies and urbanization economies on the productivity of manufacturing industrial companies in Indonesia. Unlike previous studies, this study will look at the effect of technology level on the relationship between productivity and agglomeration by classifying research samples into low-tech and high-tech industries. In addition, this study also improves the estimation technique by addressing the endogeneity problem that has the potential to arise in estimating the relationship between productivity and agglomeration to be overcome by using instrument variable (IV). The study was conducted in two stages of estimation using company-level panel data from 2010 to 2014. First, productivity was measured at the company level using Total Factor Productivity (TFP). Then, the company productivity is estimated together with the company and industry characteristic variables, including the agglomeration measurement variable which represents localization economies and urbanization economies. The regression results show a positive impact from localization economies and a negative impact from urbanization economies.AbstrakPenelitian ini bertujuan menganalisis dampak aglomerasi berupa localization economies dan urbanization economies terhadap produktivitas perusahaan industri manufaktur di Indonesia. Berbeda dengan penelitian terdahulu yang juga meneliti dampak aglomerasi industri terhadap produktivitas perusahaan, pada penelitian ini akan melihat pengaruh tingkat teknologi terhadap hubungan produktivitas dan aglomerasi dengan mengklasifikasikan sampel penelitian ke dalam industri berteknologi rendah dan industri berteknologi tinggi. Selain itu, peneltian ini juga memperbaiki teknik estimasi dari penelitian sebelumnya dengan menangani masalah endogenitas yang berpotensi muncul dalam mengestimasi hubungan produktivitas dan aglomerasi akan diatasi dengan penggunaan instrument variable (IV). Penelitian dilakukan dalam dua tahap estimasi dengan menggunakan data panel level perusahaan dari tahun 2010 sampai 2014. Pertama, produktivitas diukur pada level perusahaan dengan menggunakan Total Factor Productivity (TFP). Kemudian, produktivitas perusahaan diestimasi bersama variabel karakteristik perusahaan dan industri, termasuk variabel pengukuran aglomerasi yang mewakili localization economies dan urbanization economies. Hasil regresi menunjukkan adanya dampak positif dari localization economies dan dampak negatif dari urbanization economies. Politeknik APP Jakarta 2021-01-18 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/544 10.30988/jmil.v4i2.544 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 2 (2020): page 84 - 168; 146-156 2598-5795 2622-528X 10.30988/jmil.v4i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/544/pdf Copyright (c) 2020 Kusuma Wardani, Muhammad Halley Yudhistira

oai:ojs.pkp.sfu.ca:article/547 2022-02-18T01:03:20Z JMIL:ART

METODE GRAVITY LOCATION UNTUK OPTIMASI PENENTUAN LOKASI GUDANG PADA JARINGAN DISTRIBUSI DI PT XYZ Zhafarina (Universitas Pertamina), Athiyyah Kurniawan (Universitas Pertamina), Adji Candra Redi (BINUS University), Anak Agung Ngurah Perwira Ruswandi (Universitas Pertamina), Nanda AbstractXYZ company is a large textile dye companies in Indonesia. To reach existing consumers with lower transportation costs, XYZ Company plans to add new warehouses. This study provides an analysis using mathematical modeling for the problem of selecting a new facility location for XYZ company. The purpose of the model used is to provide recommendations for the location of candidate warehouse facilities that will be used as new warehouses. This study uses the gravity location method which is implemented simply with Microsoft Excel software. This method was chosen based on its suitability with the description of the problems XYZ company has. In this study, the data required to determine the location of the best facilities were collected according to the gravity location method procedure. The data collected is data related to consumers from XYZ companies such as location (latitude, longitude), number of requests, and distance data. The results of managerial analysis related to the old location and the new location for the facilities that will be used by the XYZ company show that the new location is projected to provide transportation cost savings of Rp. 416,910, - or 21% per week.AbstrakPerusahaan XYZ merupakan perusahaan pewarna tekstil yang cukup besar di Indonesia. Untuk menjangkau konsumen yang sudah ada dengan biaya transportasi yang lebih rendah Perusahaan XYZ berencana melakukan penambahan gudang baru. Penelitian ini memberikan analisa menggunakan pemodelan matematis untuk permasalahan pemilihan lokasi fasilitas baru bagi perusahaan XYZ. Tujuan dari model yang digunakan ini adalah memberikan rekomendasi lokasi kandidat fasilitas gudang yang akan digunakan sebagai gudang baru. Penelitian ini menggunakan metode gravity location yang diimplementasikan secara sederhana dengan perangkat lunak Microsoft Excel. Metode ini dipilih berdasarkan kesesuaiannya dengan deskripsi permasalahan yang dimiliki perusahaan XYZ. Dalam penelitian ini dikumpulkan data yang dibutuhkan untuk menentukan lokasi fasilitas terbaik sesuai dengan prosedur metode gravity location. Data yang dikumpulkan adalah data terkait konsumen dari perusahaan XYZ seperti lokasi (latitude, longitude), jumlah permintaan, dan data jarak. Hasil analisa manajerial terkait lokasi lama dan lokasi baru untuk fasilitas yang akan digunakan perusahaan XYZ menunjukkan lokasi baru diproyeksikan dapat memberikan penghematan biaya transportasi sebesar Rp. 416.910,-  atau sebesar 21% per minggu nya.  Politeknik APP Jakarta 2021-02-17 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/547 10.30988/jmil.v5i1.547 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 1 (2021): page 01 - 74; 31-41 2598-5795 2622-528X 10.30988/jmil.v5i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/547/pdf Copyright (c) 2021 Nanda Ruswandi, Adji Candra Kurniawan, Athiyyah Zhafarina, Anak Agung Ngurah Perwira Redi

oai:ojs.pkp.sfu.ca:article/552 2022-02-18T01:03:20Z JMIL:ART

ANALISIS FAKTOR YANG MEMENGARUHI KINERJA PENGADAAN BARANG/JASA DALAM KEADAAN DARURAT WABAH COVID-19 DENGAN SOCIAL DISTANCING SEBAGAI VARIABEL MODERATOR Alim (Kementerian Keuangan), Syahirul Akhmadi (Politeknik Keuangan Negara STAN), Muhammad Heru Procurement performance social distancing COVID-19 AbstractThe purpose of this study was to analyze the factors affecting the performance of the procurement of goods/services in the emergency of the Covid-19 plague with the addition of social distancing as a moderator variable. The study was conducted at the provincial government of DKI Jakarta. It was purposely selected due to the fact that the government has a sound procurement system. The general objective of the study was to analyze the factors that affect procurement performance in government organizations and the effect of social distancing on that relationship in the emergency situation during the Covid-19 plague. The specific objective of the study was; to determine the effect of government regulation for emergency procurement, e-procurement implementation employee competency, and management's commitment to the procurement performance during an emergency situation. This entailed the use of questionaries. The key finding of the study indicated that government regulation for an emergency situation, employee competency, and implementation of e-procurement positively affected procurement performance in the emergency situation of the Covid-19 plague. Furthermore, the study found that social distancing did not affect the relationship between the above-mentioned factors and procurement performance during an emergency situation.AbstrakPenelitian ini menganalisis faktor-faktor yang mempengaruhi kinerja pengadaan barang dan jasa dalam keadaan darurat wabah Covid-19 dengan menggunakan social distancing sebagai variabel moderator. Penelitian dilakukan di Pemprov DKI Jakarta sebagai organisasi yang telah memiliki sistem pengadaan yang baik melalui data kuesioner. Tujuan khusus dari penelitian ini adalah untuk mengetahui pengaruh peraturan pemerintah dalam pengadaan darurat, penerapan e-procurement, kompetensi pegawai, dan komitmen manajemen terhadap kinerja pengadaan pada saat keadaan darurat. Hasil penelitian menunjukkan bahwa regulasi pemerintah untuk situasi darurat, kompetensi pegawai, dan implementasi e-procurement berpengaruh positif terhadap kinerja pengadaan dalam situasi darurat wabah Covid-19. Sebagai tambahan, hasil penelitian juga menunjukkan bahwa variabel social distancing tidak memoderasi pengaruh empat faktor terhadap kinerja pengadaan barang dan jasa. Penggunaan teknologi informasi memungkinkan komunikasi dalam penyelesaian tugas tetap terjaga sehingga kinerja pengadaan barang dan jasa tidak terganggu selama pandemic Covid-19. Politeknik APP Jakarta 2021-02-09 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/552 10.30988/jmil.v5i1.552 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 1 (2021): page 01 - 74; 19-30 2598-5795 2622-528X 10.30988/jmil.v5i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/552/pdf Copyright (c) 2021 Syahirul Alim, Muhammad Heru Akhmadi

oai:ojs.pkp.sfu.ca:article/557 2022-02-18T01:03:01Z JMIL:ART

PERANCANGAN SISTEM INFORMASI PENGELOLAAN PERSEDIAAN BAHAN BAKU DI OUTLET PERUSAHAAN XYZ Fadhil (Universitas Pertamina), Raihan Ahmad Redi (Bina Nusantara University), A A N Perwira Lusiani (Universitas Pertamina), Mirna Inventory Management Information System Min-Max Stock Waterfall Model AbstractThis research is about design and implementation of information systems in PT XYZ Outlet. The goal is to design and implement an information system that can manage data and inventory management in an integrated and centralized manner. In designing the information system, the Waterfall model is used which has the advantages that have been considered, one of which is conformity to the characteristics of the problems found. Inventory management problems in this study solved using the Min-Max Stock method. The application of the Min-Max Stock method is effective and can reduce inventory costs at PT XYZ. For Chicken Boneless Marinated, Beef Santori Tenderloin, and Coffee Bean items each reduce 5% or IDR 1,610,000, 7% or IDR 1,598,031,648, and 11% or IDR 2,150,000. The results of the design and implementation of this information system can assist in recording and managing inventory that is integrated and centralized.AbstrakPenelitian ini membahas mengenai proses perancangan dan implementasi sistem informasi pada Outlet PT XYZ. Tujuan penelitian ini adalah memperoleh rancangan dan mengimplementasikan suatu sistem informasi yang mengintegrasikan dan memusatkan pengelolaan pencatatan serta pengelolaan persediaan. Model Waterfall digunakan untuk pengembangan sistem informasi dalam penelitian ini karena memiliki kelebihan-kelebihan yang telah dipertimbangkan, salah satunya adalah kesesuaian dengan karakterisik permasalahan yang ditemukan. Sedangkan metode pengelolaan persediaan yang digunakan dalam penelitian ini adalah metode Min-Max Stock. Penerapan Min-Max Stock sebagai metode pengelolaan persediaan efektif untuk diterapkan dan dapat memangkas biaya persediaan di PT XYZ. Untuk barang Chicken Boneless Marinasi, Beef Santori Tenderloin, dan Coffee Bean masing-masing menghasilkan penghematan sebesar 5% atau Rp 1.610.000,  7% atau Rp 1.598.031,648, dan 11% atau Rp 2.150.000. Hasil dari perancangan dan implementasi sistem informasi ini dapat membantu PT XYZ dalam melakukan proses pencatatan dan pengelolaan persediaan yang terintegrasi dan terpusat. Politeknik APP Jakarta 2021-01-18 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/557 10.30988/jmil.v4i2.557 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 2 (2020): page 84 - 168; 157-168 2598-5795 2622-528X 10.30988/jmil.v4i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/557/pdf Copyright (c) 2020 Raihan Ahmad Fadhil

oai:ojs.pkp.sfu.ca:article/571 2022-02-18T01:03:01Z JMIL:ART

HUBUNGAN ANTARA KETERAMPILAN PENJUALAN DAN KINERJA TENAGA PENJUAL DI PERUSAHAAN CAT INDONESIA Kertocahyono (Universitas Prasetiya Mulya), Aria Eddy Ginting (Universitas Prasetiya Mulya), Haryanto Kurata (Universitas Prasetiya Mulya), Julius Dermauli (Universitas Prasetiya Mulya), Risnawati Sihaloho (Universitas Prasetiya Mulya), Sony Chandra Salesmanship skill Sales force performance Paint manufacture company AbstractThe phenomenon of the existence of a successful salesperson and does not indicate that the variables affect the salesperson's performance. The understanding is beneficial for the company to provide training focus. The purpose of this study is to test the influence of sales skills dimensions (interpersonal skill, salesmanship skill, marketing skill, company's product knowledge and competitors' product knowledge) on salesperson performance in a domestic paint company which has the potential to influence salesperson performance. The questionnaire was distributed to 57 Supervisors with samples amounting to 268 salespersons form 348 population. The method is linear regression analysis through SPSS Statistik 26th edition software. This analysis was conducted to test the influence of sales skills dimensions on salesperson performance. Based on the questionnaire, it is evident that salesmanship and interpersonal skills have a significant influence on salesperson performance. On the contrary, the remaining three dimensions were found to have no influence on salesperson performance.AbstrakFenomena adanya tenaga penjual yang sukses dan yang gagal menunjukkan bahwa terdapat variabel yang memengaruhi kinerja tenaga penjual. Pemahaman ini bermanfaat bagi perusahaan untuk memberikan fokus pelatihan. Penelitian ini ditujukan untuk menguji pengaruh dimensi keterampilan penjualan yakni: keterampilan interpersonal, keterampilan keahlian menjual, keterampilan pemasaran, kemampuan pengetahuan produk perusahaan dan kemampuan pengetahuan produk pesaing terhadap kinerja tenaga penjual di sebuah perusahaan cat nasional yang memiliki potensi untuk memengaruhi kinerja tenaga penjual. Kuesioner didistribusikan kepada 57 Supervisor dengan sampel sebanyak 268 orang dari populasi sejumlah 348 orang. Metode analisis regresi linier menggunakan perangkat lunak SPSS Statistik edisi 26, analisis ini untuk menguji atas pengaruh dimensi keterampilan terhadap kinerja dari tenaga penjual. Berdasarkan pengumpulan kuesioner terlihat bahwa keterampilan dalam penjualan dan keterampilan interpersonal secara signifikan memengaruhi kinerja tenaga penjual. Sementara itu, ketiga dimensi yang lain tidak berpengaruh terhadap kinerja tenaga penjual. Politeknik APP Jakarta 2021-01-18 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/571 10.30988/jmil.v4i2.571 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 2 (2020): page 84 - 168; 84-101 2598-5795 2622-528X 10.30988/jmil.v4i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/571/296 https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/571/pdf Copyright (c) 2020 Sony Chandra Sihaloho

oai:ojs.pkp.sfu.ca:article/652 2022-02-18T01:03:20Z JMIL:ART

PERILAKU EKSPOR DAN PRODUKTIVITAS PADA USAHA MANUFAKTUR MIKRO DAN KECIL DI INDONESIA: PENDEKATAN MODEL LIMITED DEPENDENT Kiswanto (Universitas Indonesia), Edi AbstractThis study examines the role of productivity in explaining Indonesian micro and small manufacturing firms' export behavior based on a firm-level dataset of micro and small manufacturing survey year 2015 (VIMK15) from Statistics Indonesia. By utilizing the Probit and Tobit model, this study analyses the role of the firm's productivity, which is proxied by labor productivity and output to cost ratio, on determining firms' export participation and intensity. The other factor related to productivity and firms' characteristic is also used as control variables. This study found that labor productivity and output to cost ratio positively and significantly determine export participation and intensity even though its marginal effect plays a minor role in the export behavior. Besides, as measured by CEO education and employment training, human capital contributes a major impact on encouraging firms to participate in the export market. Therefore, providing appropriate and reasonable employee training might support Indonesian micro and small manufacturing firms' development. Politeknik APP Jakarta 2021-03-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/652 10.30988/jmil.v5i1.652 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 1 (2021): page 01 - 74; 42-52 2598-5795 2622-528X 10.30988/jmil.v5i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/652/pdf Copyright (c) 2021 Edi Kiswanto

oai:ojs.pkp.sfu.ca:article/654 2023-04-03T02:13:52Z JMIL:ART

STUDI PERBANDINGAN KEBIJAKAN INDUSTRI 4.0 INDONESIA DENGAN TIGA NEGARA LEADING GROUP FUTURE OF PRODUCTION Wisnu Murti (Kementerian Perindustrian), Hari Siregar, M. Tirtana AbstractThe World Economic Forum has compiled a profile of future of production readiness among 100 countries in the world where Indonesia is in the nascent group and requires benchmarking to the leading groups through SWOT Analysis. This study aims to compare Indonesia's industry 4,0 policy with leading countries through a comparative study. The data is obtained from industry 4.0  policy from Indonesia and three leading countries. The results of the study indicate that the Making Indonesia 4.0 policy is on the right track to pursue manufacturing competence and answer future challenges that will be faced by Indonesia and the current baseline, has weaknesses in priority sectors that do not support increased complexity. Opportunities that can be taken are trade infrastructure with other countries, investment opportunities for countries that lack human resources, and cooperation in sustainability standards. The challenge lies in the common priority sectors of the industry and the absence of AI research priorities for health and biotechnology while Indonesia has a large domestic market.AbstrakWorld Economic Forum  menyusun profil kesiapan industri masa depan  pada 100 negara di dunia dimana Indonesia tergolong kelompok Nascent dan membutuhkan pembandingan dengan negara-negara kelompok Leading melalui analisa SWOT, Studi ini bertujuan untuk membandingkan kebijakan industri 4.0 Indonesia dengan negara-negara kelompok Leading melalui studi komparatif. Data diperoleh dari kebijakan industri 4.0 dari Indonesia dan tiga negara kelompok leading. Hasil dari studi mengindikasikan bahwa kebijakan Making Indonesia 4.0 telah pada jalur yang tepat untuk mengejar kompetensi manufaktur dan menjawab tantangan masa depan yang akan dihadapi Indonesia dan baseline saat ini, mempunyai kelemahan pada sektor prioritas yang tidak mendukung peningkatan kompleksitas. Peluang yang bisa diambil adalah infrastruktur perdagangan dengan negara lain, peluang investasi untuk negara yang kurang dalam sumber daya manusia, dan kerjasama standar sustainability. Tantangan ada pada kesamaan sektor prioritas industri dan belum adanya prioritas riset AI untuk kesehatan dan bioteknologi sementara Indonesia mempunyai pasar domestik yang besar. Politeknik APP Jakarta 2021-05-03 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/654 10.30988/jmil.v5i1.654 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 1 (2021): page 01 - 74; 62-74 2598-5795 2622-528X 10.30988/jmil.v5i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/654/pdf Copyright (c) 2021 Hari Wisnu Murti

oai:ojs.pkp.sfu.ca:article/689 2022-02-18T01:03:01Z JMIL:ART

Daftar Isi Isi, Daftar DAFTAR ISI VOL. 04. NO. 02. NOVEMBER 2020 Politeknik APP Jakarta 2021-01-18 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/689 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 2 (2020): page 84 - 168 2598-5795 2622-528X 10.30988/jmil.v4i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/689/76 Copyright (c) 2021 Daftar Isi

oai:ojs.pkp.sfu.ca:article/690 2022-02-18T01:03:01Z JMIL:ART

Pengantar Redaksi Redaksi, Pengantar Pengantar Redaksi Politeknik APP Jakarta 2021-01-18 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/690 Jurnal Manajemen Industri dan Logistik; Vol. 4 No. 2 (2020): page 84 - 168 2598-5795 2622-528X 10.30988/jmil.v4i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/690/77 Copyright (c) 2021 Pengantar Redaksi

oai:ojs.pkp.sfu.ca:article/702 2023-05-22T12:48:59Z JMIL:ART

ANALISIS SIKAP KONSUMEN DI MASA PANDEMI COVID-19 DAN PENGARUHNYA TERHADAP KEPUTUSAN PEMBELIAN DI COFFEE SHOP JABODETABEK Andrianto, Mokhamad Syaefudin Sayekti, Andita Daniel, Freddi Consumer Attitudes Coffee Shop Covid-19 Pandemic Purchase Decision SEM abstractThe Covid-19 pandemic has a negative impact on various types of foods and beverages business including a coffee shop. The objective of this research is to analyze consumer attitudes during the Covid-19 pandemic and the influence of consumer attitudes during the Covid-19 pandemic on purchasing decisions at coffee shop. The sample of this research is 100 respondents in Jabodetabek (Jakarta, Bogor, Depok Tangerang, and Bekasi). Sampling methods using purposive sampling technique. Sampling data is collected by distributing questionnaires to consumers who had visited a coffee shop in Jabodetabek. The analysis data using Structural Equation Modeling method with Partial Least Squares. The results of the analysis show that consumers aware with the Covid-19 pandemic and its health protocols. Consumers also apply the government's Covid-19 health protocol. Consumer attitudes during this pandemic have a negative effect on purchasing decisions at coffee shop. abstrakPandemi Covid-19 cenderung berdampak negatif pada berbagai jenis usaha di sektor makanan dan minuman, termasuk coffee shop. Tujuan penelitian ini adalah untuk menganalisis sikap konsumen pada masa pandemi Covid-19 dan pengaruh sikap konsumen pada masa pandemi Covid-19. terhadap keputusan pembelian di coffee shop. Sampel dari penelitian ini adalah konsumen di Jabodetabek sebanyak 100 responden. Pengambilan sampel menggunakan teknik purposive sampling. Pengambilan data dilakukan dengan menyebarkan kuesioner ke konsumen yang pernah melakukan kunjungan coffee shop di Jabodetabek. Analisis data dilakukan menggunakan Structural Equation Modeling (SEM) dengan pendekatan Partial Least Squares. Hasil analisis menunjukkan konsumen mengetahui pandemi Covid-19 dan protokol kesehatan. Konsumen juga menerapkan protokol kesehatan Covid-19 dari pemerintah. Sikap konsumen pada masa pandemi ini berpengaruh negatif terhadap keputusan pembelian di coffee shop.  Politeknik APP Jakarta 2021-10-06 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/702 10.30988/jmil.v5i2.702 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 2 (2021): page 75 - 217; 75-84 2598-5795 2622-528X 10.30988/jmil.v5i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/702/pdf Copyright (c) 2021 Andita Sayekti, Freddi Daniel, Mokhamad Syaefudin Andrianto

oai:ojs.pkp.sfu.ca:article/723 2023-05-22T12:48:59Z JMIL:ART

IMPLEMENTASI CONSIGNMENT STOCK DAN MARKETING MIX STRATEGY 4P UNTUK MENURUNKAN PERSEDIAAN PADA PART AND SERVICE DEPARTMENT DI PT. COAL MINING Azwir, Hery Hamdi Hidayatulloh, Arif Oemar, Hirawati days on inventory inventory deadstock consignment stock mix strategy 4P AbstractThe company has complaints about the high inventory which is a burden to the company. Based on the observations, the inventory level in the Part and Service department in July with a value of days on inventory of 149 days exceeded the maximum target of 120 days. This study aims to find a way to reduce the value of days on inventory and deadstock as much as possible so that it can reduce costs. To find a solution to the problem, an ABC, SWOT, and business solution analysis was carried out through focus group discussions (FGD) with seniors and experts on this issue. From all the results of the analysis it was agreed that the consignment stock method and the 4P mix strategy could be implemented. After implementing this idea, good results were obtained, namely a decrease in inventory of Rp. 37,347,572,356 to Rp. 27,650,733,680 (down 26%) and the value of days on inventory from 149 days to 98 days and also a decrease in deadstock from Rp. 11,641,000,000 to Rp. 8,626,000,000 (down 26%)AbstrakPerusahaan memiliki keluhan akan tingginya inventory (inventory) yang menjadi beban bagi perusahaan. Berdasarkan hasil observasi, tingkat  inventory pada DePartemen Part and Service pada bulan Juli  2018 ditemukan nilai days on inventory sebesar 149 hari yang mana telah melebihi batas maksimum yaitu 120 hari. Penelitian ini bertujuan untuk menemukan cara agar nilai days on inventory dan deadstock dapat ditekan semaksimal mungkin sehingga dapat menekan cost. Untuk mencari solusi permasalahan dilakukan analisis ABC, SWOT, dan solusi bisnis melalui focus group discussion (FGD) dengan para senior dan ahli dalam masalah ini. Dari seluruh hasil analisis disepakati bahwa metode consignment stock dan mix strategy 4P lah yang dapat diimplementasikan. Setelah implementasi ide tersebut, didapatkan hasil yang baik yakni penurunan inventory Rp 37.347.572.356 menjadi Rp 27.650.733.680 (turun 26%) serta nilai days on inventory dari 149 hari menjadi 98 hari dan juga penurunan atas deadstock dari Rp 11.641.000.000 menjadi Rp 8.626.000.000 (turun 26%). Politeknik APP Jakarta 2021-11-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/723 10.30988/jmil.v5i2.723 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 2 (2021): page 75 - 217; 93-106 2598-5795 2622-528X 10.30988/jmil.v5i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/723/pdf Copyright (c) 2021 Hery Hamdi Azwir

oai:ojs.pkp.sfu.ca:article/724 2023-05-22T12:48:59Z JMIL:ART

ANALISIS PENGARUH CUSTOMER EXPERIENCE TERHADAP LOYALITAS PELANGGAN Ray, Erick Lauren Wirya Artha, I Nyoman Dewi, Erlita Khrisinta Customer Experience Loyalitas Pelanggan Restoran abstractThis study aims to see the effect of sense, feel, act, think, relate on customer loyalty. The variables sense, feel, act, think and relate are part of the customer experience which are the independent variables, while the variable customer loyalty is the dependent variable. The object of this research is the visitors to the hoka-hoka bento restaurant or what is known as hokben. The target respondents for this study were 70 people spread across four hokben outlets in the South Jakarta area. The results of the study show that the variables sense, act and relate have a positive effect on customer loyalty in Hokben restaurant, while the variables feel and think do not have a significant effect on customer loyalty. The most dominant dimension of customer experience in this study is shown in the act experience variable.abstrakPenelitian ini bertujuan untuk melihat pengaruh antara sense, feel, act, think, relate terhadap loyalitas pelanggan. Variabel sense, feel, act, think dan relate adalah bagian dari customer experience yang menjadi variabel independen, sedangkan variabel loyalitas pelanggan adalah sebagai variabel terikat. Adapun objek penelitian ini adalah pengunjung restoran hoka-hoka bento atau yang dikenal hokben. Target responden untuk penelitian ini berjumlah 70 orang yang tersebar di empat gerai hokben di wilayah Jakarta Selatan.  Hasil peneltian menunjukan bahwa variabel sense, act dan relate berpengaruh positif terhadap loyalitas pelanggan restoran hokben sedangkan variabel feel dan think tidak berpengaruh signifikan terhadap loyalitas pelanggan. Dimensi customer experience dalam penelitian ini yang paling dominan ditunjukan pada variabel act experience. Politeknik APP Jakarta 2021-10-08 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/724 10.30988/jmil.v5i2.724 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 2 (2021): page 75 - 217; 85-92 2598-5795 2622-528X 10.30988/jmil.v5i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/724/pdf Copyright (c) 2021 Erick Lauren Ray

oai:ojs.pkp.sfu.ca:article/726 2022-02-18T01:03:20Z JMIL:ART

ANALISIS PENGARUH BRAND IMAGE, PROMOTION, DAN ELECTRONIC WORD OF MOUTH TERHADAP MINAT BELI PADA APLIKASI ONLINE SHOP Kuswibowo (Politeknik APP), Christian Murti (Politeknik APP), Aji Kresno Brand Image Promotion Electronic Word of Mouth Purchase Intention AbstractThis research is conducted to examine the outcome of Brand Image, Promotion, and e-WOM toward Purchase Intention in the Online Shop application. The object of this research is millennial consumers who utilizes Shopee application in Jakarta area. This research was conducted on 150 respondents using a quantitative descriptive approach. Determining the sample size using purposive sampling technique due to some contemplation. Data collection method using a survey method, with the questionnaire as its research instrument. The approaches equipped in this research is the Structural Equation Model (SEM) with the Smart-Partla Least Square analysis tool. This research proves that Brand Image had a positive and significant effect on Purchase Intention in the Online Shop application, Promotion has a positive and significant effect on Purchase Intention in the Online Shop application and EWOM has a significant and fundamental outcome on Purchase Intention in the Online Shop application.AbstrakPenelitian ini ditulis oleh peneliti untuk melakukan analisis pengaruh antara Brand Image, Promotion, dan Electronic Word of Mouth (EWOM) terhadap Minat Beli pada aplikasi Online Shop. Objek riset ini merupakan para konsumen milenial yang menggunakan aplikasi Shopee di area DKI Jakarta. Pendekatan deskriptif kuantitatif digunakan dalam riset ini dengan memanfaatkan 150 responden. Teknik purposive sampling juga dimanfaatkan untuk penentuan ukuran sampling, purposive sampling technic dipilih karena pertimbangan beberapa faktor oleh peneliti dalam penerapannya. Pengumpulan data menggunakan survey method, dengan kuesioner sebagai instrument penelitiannya. Pendekatan penelitian menggunakan Structural Equation Model dengan dukungan Smart-Partial Least Square sebagai alat analisis riset.  Riset ini memperlihatkan bahwa Brand Image memberikan pengaruh positif dan signifikan terhadap Minat Beli pada aplikasi Online Shop, Promotion memberi pengaruh positif serta signifikan terhadap Minat Beli pada aplikasi Online Shop serta Electronic Word of Mouth atau e-WOM berdampak positif signifikan terhadap Minat Beli pada aplikasi Online Shop. Politeknik APP Jakarta 2021-04-15 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/726 10.30988/jmil.v5i1.726 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 1 (2021): page 01 - 74; 53-61 2598-5795 2622-528X 10.30988/jmil.v5i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/726/pdf Copyright (c) 2021 Christian Kuswibowo

oai:ojs.pkp.sfu.ca:article/817 2023-05-22T12:48:59Z JMIL:ART

ANALISIS PENGARUH WAKTU DAN JARAK PERJALANAN KAPAL TERHADAP BIAYA LOW SULPHUR SURCHARGE Kurnia, Gita Nawadir, Maulida Low Sulphur Surcharge Multiple Linear Regression Freight Cost Shipping Ocean Freight Forwarder AbstractThe danger of ship emission caused by HFO (Heavy Fuel Oil) fuel type has become a serious matter due to its high containment of sulphur as much as 3.50% m/m. The IMO (International Maritime Organization) took action on this problem by releasing new regulation to limit sulphur in the ship fuel as low as 0.50% m/m. This regulation leads to an additional tariff called the LSS (Low Sulphur Surcharge). As an impact, shipping companies charge this fee to customers and ocean freight forwarders, hence there is an increase of the total shipping charges. Meanwhile, the dominant variable which determines the LSS charge amount is not yet known, so it is still uninformative for the public and the academic field. The purpose of this study is to analyse which variable gives the most influence on the amount of the LSS tariff. By using multiple linear regression method, the study finds that the shipping distance variable is the dominant variable with a contribution value of 86.48% and has positive relationship with the LSS tariff. On the other hand, though the voyage time also has influence on the tariff, the effect is weak and it shows negative relationship with the LSS tariff. Politeknik APP Jakarta 2021-10-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/817 10.30988/jmil.v5i2.817 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 2 (2021): page 75 - 217; 107-120 2598-5795 2622-528X 10.30988/jmil.v5i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/817/pdf Copyright (c) 2021 Gita Kurnia, Maulida Nawadir

oai:ojs.pkp.sfu.ca:article/818 2022-02-18T01:03:20Z JMIL:ART

Daftar Isi Isi, Daftar Daftar Isi Politeknik APP Jakarta 2021-05-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/818 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 1 (2021): page 01 - 74 2598-5795 2622-528X 10.30988/jmil.v5i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/818/114 Copyright (c) 2021 Daftar Isi

oai:ojs.pkp.sfu.ca:article/832 2023-05-22T12:48:59Z JMIL:ART

KOMPARASI FUZZY AHP, TOPSIS DAN SMART UNTUK PEMILIHAN SUPPLIER Wibawa, Samdan Ekawati, AD Maryadi, Budian Fitriyani, Nurafni Redi, AANP abstractPT.XYZ is a manufacturing drilling tools company where the assembly parts are supplied by the other companies. With 4% average percentage of not good (NG) from incoming assembly inspections in 2019 and the peak of 9,8% in April, the company needs to review its current suppliers. This research compares the result of the supplier selection using FAHP, TOPSIS and SMART methods to get the recommended suppliers. The three methods resulted the same suppliers with the highest value which is Supplier#3 and the three lowest values which are Supplier#4, Supplier#7 and Supplier#2 it is recommended to re-evaluation to improve their performance. This research compares the result of the supplier selection using FAHP, TOPSIS and SMART methods to get the recommended suppliers. The questionnaires were given to 12 subject matter experts. Using FAHP, TOPSIS and SMART methods to get the recommended suppliers.. Politeknik APP Jakarta 2021-11-22 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/832 10.30988/jmil.v5i2.832 Jurnal Manajemen Industri dan Logistik; Vol. 5 No. 2 (2021): page 75 - 217; 121-129 2598-5795 2622-528X 10.30988/jmil.v5i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/832/pdf Copyright (c) 2021 Samdan Wibawa

oai:ojs.pkp.sfu.ca:article/940 2026-01-17T06:32:10Z JMIL:ART

Implication of the Covid-19 Pandemic on the Governance of International Trade in the West Kalimantan's Entikong Border Martoyo, Martoyo Alunaza, Hardi Ernianda, Annisa Putri, Anggi Mosquera Montoya, Maria Angela Lorena Export Import International Trade Entikong Border This paper is presented in response to the issue related to the impact of the COVID-19pandemic on the trade sector at the Entikong Border in West Kalimantan. The author uses cross-border governance to explain the dynamics and import-export activities during the pandemic. Data collection techniques in this study were interviews and literature studies. The results of this article show that export and import activities will continue during the pandemic. In 2020, it was found that freight shipments were recorded on both routes alone with 44.03% import-export activity through Supadio Airport amounting to US$193,668,243 and the Ports of Kendawang and Pontianak contributing 29.10%. In addition, there are oxygen import activities for pandemic mitigation and electricity imports to meet the needs of people at the border. During the pandemic, there was a change in international trade procedures impacted the depreciation of exports from Indonesia in early 2020 and started to stabilize in mid-April 2021. The Malaysian government's oxygen import policy took place as a result of the issue of increased oxygen demand during the Covid-19 pandemic. The activity of opening the two national borders between Indonesia and Malaysia can only be carried out for the importation of oxygen tanks (liquid oxygen), as well as the repatriation of PMI and the repatriation of motorized vehicles. Politeknik APP Jakarta 2022-06-01 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/940 10.30988/jmil.v6i1.940 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 01-09 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/940/pdf Copyright (c) 2022 Hardi Alunaza, Martoyo Martoyo, Annisa Ernianda, Anggi Putri, Maria Angela Lorena Mosquera Montoya

oai:ojs.pkp.sfu.ca:article/952 2026-01-17T06:32:10Z JMIL:ART

PVC Resin Supplier Selection with Integration of AHP and TOPSIS Methods Putri, Frydella Krisna Pulansari, Farida AHP PVC Resin Supplier Selection TOPSIS Choosing the right suppliers is important for companies to provide raw materials for production in the long run. The sustainability of production activities is tightly controlled by suppliers in the manufacturing industry. A company in Mojokerto that manufactures PVC pipes falls under the plastic pipe industry sector. Raw materials for PVC resins must be ensured through assessments of suppliers. This study was conducted to determine which resin supplier was the best based on predetermined criteria. Variable include: price, quality, delivery, quantity accuracy, and service. To determine the order of preference for resin suppliers, this study uses AHP, which gives the individual a probability score for each criterion, and TOPSIS, which gives the user an indication of which supplier to choose when selecting a resin. As a result of data processing, suppliers are ranked based on their preferences. The preference values for each supplier are: supplier 1, which is 0.927; supplier 2, which is 0.739; supplier 3, which is 0.091; and supplier 4, which is 0.267. There are five parameters used in this study, and quality is known to have an influence of about 47% on the four suppliers. However, the delivery and service parameters only contribute 5%. Politeknik APP Jakarta 2022-05-27 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/952 10.30988/jmil.v6i1.952 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 84-98 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/952/151 Copyright (c) 2022 Frydella Krisna Putri

oai:ojs.pkp.sfu.ca:article/968 2026-01-17T06:32:10Z JMIL:ART

Improving Service Quality Of Delivery Services Based On Heterogeneous Customer Behavior In A Developing Country: A Context During Covid-19 Muslimin, Rahmat Hidayat Darmawan, Armin Bahri, Syamsul Rapi, Amrin Heterogeneous Customer Satisfaction Index (HCSI) Service Quality Importance-Performance Analysis Logistics Delivery Services Delivery services are going through a transition phase globally due to changes in the market dynamics and growing e-commerce industries. As the delivery services of public logistics organizations have a lasting impact on customer behavior, logistics organizations are using innovative, customer-centric, and cost-effective strategies to offer customers convenient, attractive, and effective service solutions. The current study has been undertaken to analyze the effectiveness of each element of quality services of delivery services. Qualitative and quantitative research approaches were implemented based on a hundred respondents in identifying the critical issues based on the SERVQUAL method, heterogeneous customer satisfaction index (HCSI), and mapping out prioritizing the most critical problem. The study results reveal that customers are susceptible to the responsive, assurance, and empathy dimensions. These three of five dimensions are adversely influencing the satisfaction of customers. Politeknik APP Jakarta 2022-06-02 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/968 10.30988/jmil.v6i1.968 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 43-64 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/968/pdf Copyright (c) 2022 Armin Darmawan, Rahmat Hidayat Muslimin, Syamsul Bahri, Amrin Rapi

oai:ojs.pkp.sfu.ca:article/972 2026-01-17T06:32:10Z JMIL:ART

Economic Growth And Carbon Emissions In Asean-6 To Achieve Sustainable Development Goals Through Kuznet Curve Environmental Analysis Approach Soeharjoto, Soeharjoto Salma, Nabila Inas Tribudhi, Debbie Aryani Masyhudi, Lalu Carbon emissions Environmenta l Kuznet Curve population energy Sustainable Development Goals This study aims to determine carbon emissions in the Association of Southeast Asian Nations-6 (ASEAN-6) in achieving Sustainable Development Goals using the Kuznet environmental curve analysis approach. Used panel data regression method with carbon emissions as a dependent variable and Gross Domestic Product per capita, Squared Gross Domestic Product per capita, population, energy consumption and Sustainable Development Goals as independent variables. Used panel data from 2009-2018, samples taken from Singapore, Malaysia, Indonesia, Thailand, Philippines and Vietnam. Results are the suitable random effect model, with per capita Gross Domestic Product and energy consumption having a positive and significant effect on carbon emissions. In contrast, the squared Gross Domestic Product Per capita, population and Sustainable Development Goals have a negative and significant impact on carbon emissions. The Environmental Kuznet curve hypothesis has been proven in this area, although only Singapore has reached a turning point, so  ASEAN-6 will still experience in carbon emissions increase. For this reason, ASEAN-6 needs to implement sustainable development policies, family planning, environmentally friendly energy development, and coordination and seriousness in implementing the Sustainable Development Goals. Politeknik APP Jakarta 2022-05-24 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/972 10.30988/jmil.v6i1.972 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 10-20 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/972/pdf Copyright (c) 2022 Nabila Inas Salma, Debbie Aryani Tribudhi

oai:ojs.localhost:6001:article/975 2023-07-03T06:00:06Z JMIL:ART

oai:ojs.pkp.sfu.ca:article/976 2026-01-17T06:32:10Z JMIL:ART

Digital Marketing and Brand Image To Increase Consumer Purchase Interest Zulfikar, Taufik Aprianti, Ine Rachmawati, Eva Tutoring Institutions Brand Image Interest in Buying Digital Marketing The digital marketing implemented optimally will improve the positive perception of the consumer candidates so that it develops a strong brand image impacting at an interest in buying.  How the institution maximizes the digital marketing function and how the institution's brand in the mind of the candidates might influence the interest of the students to become the students of the institution have become the phenomenon interesting to research.  This research aims to assess the influence of digital marketing and brand image on buying in the students of tutoring institutions in Bandung.  The research method used in this research is multiple linear regression.  The analysis units used in this research are the students of tutoring institutions in Bandung.  The sample-taking way is done using simple random sampling.  The value of the coefficient 1 = 0.466 and 2 = 0.457 and the value of F value is 710.596. The result shows that digital marketing and brand image influence interest in buying both simultaneously and partially. Politeknik APP Jakarta 2022-05-27 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/976 10.30988/jmil.v6i1.976 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 21-29 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/976/pdf Copyright (c) 2022 Taufik Zulfikar

oai:ojs.pkp.sfu.ca:article/982 2026-01-17T06:32:10Z JMIL:ART

Evaluation Of Relationship Causes Of The Return Process In The Supply Chain Of The Textile Industry Yuliawati, Evi - Putri, Vitara Injang Ridhani Ferninda Brilliana, Clora Widya textile industry interpretive structural modeling return process supply chain This research focuses on the return process, the process where consumers decide to return the product after receiving an order or after making a purchase. This incident is not desired by the company, because it has the potential to reduce profits and consumer loyalty. However, the company is aware that the return process cannot be avoided. So this research aims to evaluate the factors that have the potential to cause the return process by using the Interpretive Structural Modeling (ISM) Methodology. This research case study was conducted on a textile company that serves orders for school uniforms, office uniforms, moslem clothes, etc. Nine factors were identified, that are: off-season, overstock, delivery error, incorrect size, incorrect color, quality issue, change mind, damaged item, and incorrect product, which are the reasons consumers carry out the return process. The results of the ISM-based model and MICMAC analysis mapping show that the quality issue factor is the key reason for consumers to make the return process. The strategy of handling presses return in connection with these factors is carried out by developing a system that supports customer support work to maintain consumer loyalty. Through the ISM methodology, companies can simplify complex problems, so they focus on the factors that are the root of the problem to be able to design strategies to deal with them. Politeknik APP Jakarta 2022-05-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/982 10.30988/jmil.v6i1.982 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 30-42 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/982/pdf Copyright (c) 2022 Evi - Yuliawati, Vitara Injang Ridhani Ferninda Putri, Clora Widya Brilliana

oai:ojs.pkp.sfu.ca:article/988 2026-01-17T06:29:58Z JMIL:ART

The Effect of Product Quality and Distribution Channels on Repurchasing Intention Adeosandi, Ferdian askafi, Eka Mutiara, Nisa Product quality Distribution channels Consumer satisfaction Repurchase intention Covid-19 pandemic This research was motivated by the Covid-19 pandemic, which directly changed people's lifestyles. The purposes of this study were: (1) To determine the effect of product quality and distribution channels on repurchase intentions in users of the application's food ordering feature to become an online driver in the City of Kediri (2) To determine consumer satisfaction can mediate the effect of product quality on repurchase intentions in consumers. Application messaging feature users become online drivers in the city of Kediri. The research uses a quantitative approach with a questionnaire instrument. The results obtained from this study are Product quality partially has no effect on repurchase intentions, Distribution channels partially have a significant positive impact on repurchase intentions, partially, consumer satisfaction has a positive on repurchase intentions, Product quality has a positive effect on consumer satisfaction, and distribution channels have a positive impact on consumer satisfaction Politeknik APP Jakarta 2023-05-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/vnd.openxmlformats-officedocument.wordprocessingml.document application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/988 10.30988/jmil.v7i1.988 Jurnal Manajemen Industri dan Logistik; Vol. 7 No. 1 (2023): 14 original research articles were authored/co-authored by 41 authors from 1 countries (Indonesia); 177-194 2598-5795 2622-528X 10.30988/jmil.v7i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/988/297 https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/988/pdf Copyright (c) 2022 Ferdian Adeosandi

oai:ojs.pkp.sfu.ca:article/989 2026-01-17T06:32:10Z JMIL:ART

Understanding Business Management Strategies in Enhancing Profitable and Sustainable SMEs Sabil, Sabil Djakasaputra, Arifin Bangkara, B.M.A.S. Anaconda Manullang, Sardjana Orba Hendriarto, Prasetyono Strategy Business Management Increase Profits Sustainable MSME The purpose of this research was to get deeper undestanding on management of SMEs to win profitable and sustainable business. The publication of books, journal, and websites were become the main sources of the data that we got electronically. Because of this reason, several literatures related to profitable business strategies have been carefully studied to understand superior and sustainable governance and business strategies. The literature included is the electronic literature such as books and scientific articles. After reviewing and obtaining the valid answers, we discussed them carefully. Finally, we find several business management strategies to increase the profitability and sustainability of SMEs such as strategies to attract customers, continue to use various promotional methods, seek to increase subscriptions, add new items, and increase discounts. Politeknik APP Jakarta 2022-06-30 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/989 10.30988/jmil.v6i1.989 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 112-131 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/989/pdf Copyright (c) 2022 Sabil Sabil, Arifin Djakasaputra, B.M.A.S. Anaconda Bangkara, Ari Purwanti, Prasetyono Hendriarto

oai:ojs.pkp.sfu.ca:article/991 2026-01-17T06:32:37Z JMIL:ART

The Influence Of Ambassador's Brand On Brand Image And Their Impact On Buying Interest Of Tokopedia Consumers Nova, Firsan Brand Ambassador Brand Image Impact Buying Interest Consumer This study aimed to determine the effect of brand ambassadors on buying interest through the brand image in Tokopedia e-commerce and using primary data from the distribution of questionnaires from 210 respondents domiciled in East Jakarta who uses Tokopedia. Samples were taken using purposive sampling and determining the number of samples using quota sampling. The analysis test was carried out using Structural Equation Modeling (SEM) and processing using LISREL ver. 8.8. The results showed that the influence of brand ambassadors through the brand image on buying interest in e-commerce Tokopedia was positive, or there was a significant relationship. Based on these results, it can be said that brand image as an intervening variable has a positive influence or has a significant relationship. Politeknik APP Jakarta 2023-05-25 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/991 10.30988/jmil.v6i2.991 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 2 (2022): 10 original research articles were authored/co-authored by 41 authors from 3 countries (Indonesia, Malaysia, and Taiwan); 216-226 2598-5795 2622-528X 10.30988/jmil.v6i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/991/pdf Copyright (c) 2022 Firsan Nova

oai:ojs.pkp.sfu.ca:article/994 2026-01-17T06:29:36Z JMIL:ART

The Effect Of Halal Labelization And Brand Image On Tourism Decisions In Demak District Yulianto, Heru Palupiningtyas, Dyah Mudrik, Mudrik Amsar, Amsar This study aims to determine the effect of halal labeling on travel decisions in Demak Regency and to determine the effect of brand image on decision making traveling in Demak Regency. This type of research is qualitative and the research design aims to test hypotheses or explain the influence between variables (Indriantoro, et al., 2002:89). The population of this research is all consumers who travel in Demak Regency. Sampling was done by convenience sampling technique, namely collecting information from members of the population who are happy to provide information. Based on the results of research and hypothesis testing, it can be concluded that Brand Labeling has a positive contribution to Tourism Decisions in Demak Regency. Brand Image contributes positively to tourism decisions in Demak district.  Politeknik APP Jakarta 2024-04-29 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/994 10.30988/jmil.v7i2.994 Jurnal Manajemen Industri dan Logistik; Vol. 7 No. 2 (2023): 10 original research articles were authored/co-authored by 35 authors from 1 countries (Indonesia); 334-353 2598-5795 2622-528X 10.30988/jmil.v7i2 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/994/pdf Copyright (c) 2022 Heru Yulianto https://creativecommons.org/licenses/by/4.0

oai:ojs.pkp.sfu.ca:article/995 2026-01-17T06:32:10Z JMIL:ART

Fresh Insights Using Ardl Bound Testing Approach and Analysis of Public Economic Growth Affecting Environmental Quality in Indonesia Rulinawaty, Rulinawaty Environmental pollution Economic Development Indonesia EKC ARDL GDP and CO2 emission The primary purpose of this research is to testify Environmental Kuznets Curve-EKC hypothesis for the economy of Indonesia. ADF and PP unit root tests confirmed the mixed order of integration in the model based on the time-series.data,spanning over 1990 to 2016. Furthermore, the result of ARDL – Long-run confirmed the presence of the EKC hypothesis for the Indonesian economy. In the short run, not an inverted U-shaped relationship has been observed between growth and energy. ECM and bond test verified the existence of cointegration in the model while CUSUM and CUSUM square with other model diagnostics confirmed that the model is the best fit. Based on the results of the analysis, it can be concluded that short & long run dynamic association amongst CO2 Carbon Dioxide, consumption of the energy, urban populations, and the economic development in Indonesia have been examined in this research. Politeknik APP Jakarta 2022-07-06 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/995 10.30988/jmil.v6i1.995 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 149-161 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/995/pdf Copyright (c) 2022 Rulinawaty Rulinawaty

oai:ojs.pkp.sfu.ca:article/1000 2026-01-17T06:32:10Z JMIL:ART

Construction capital structure; soe and non-soe in the pandemic era Hariandja, Nancy Megawati Siregar, Hermanto Suroso, Arif Imam Manurung, Adler Haymans Covid19 Pandemic Dynamic Panel Data Speed of Adjustment This research aims to actuate the determinants of the capital structure of the state and non-state-owned construction industries during the infrastructure policy and the Covid-19 pandemic periods. Secondary data were collected quarterly from 2013 to 2020 from the Indonesia Stock Exchange (IDX), Bank Indonesia, and the Ministry of Public Works and Public Housing budget using a dynamic panel data with the Generalized Method of Moments. It was found that speed of adjustment, profitability, tangibility, activity, and infrastructure policies affect the capital structure of state-owned construction companies. Meanwhile, speed of adjustment, profitability, tangibility, and exchange rate affect non-state-owned construction companies. The result showed that state-owned and non-state-owned construction companies have a gap of 27.3% and 17.7% %, respectively. Furthermore, both companies have speed adjustment values of 1.38 period and 1.21 period. This means that non-state-owned construction companies' adjustment speed is faster than their state-owned counterpart. Therefore, the decision-making of debt construction companies needs to consider the financial characteristics and ownership of the company. Politeknik APP Jakarta 2022-10-31 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/1000 10.30988/jmil.v6i2.1000 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia) 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/1000/pdf Copyright (c) 2022 Nancy Megawati Hariandja, Hermanto Siregar

oai:ojs.localhost:6001:article/1001 2023-06-11T13:46:40Z JMIL:ART

oai:ojs.pkp.sfu.ca:article/1002 2026-01-17T06:32:10Z JMIL:ART

The Influence Of Entrepreneurship Marketing Systems And Innovation On Competitive Advantage On Culinary Of UMKM In Bandung City Dwiki Kurniawan, Muhammad Fariz Dzulfikar, Muhamad Fajar Ramadhan, Fakhri Wijaya, Tomi Ikbal Feronika, Yohana Competitve advantage Classical assumption Deduction regression Entrepreneurship The purpose of this study is to determine whether the marketing system of entrepreneurship and innovation has an effect on the competitive advantage in the food of UMKM in the City of Bandung. The population used in this study derived data from a questionnaire that is distributed to UMKM in the City of Bandung, with the last sample of 123 respondents using the method of test, the classical assumption that in the test with the tests of normality, test heteralitas, trial serentitas multisoility, and some analysis subefisensi by using deduction regression. The results of the analysis of the data of the state that entrepreneurship and marketing system innovation have a positive effect or significant in the variable competitive advantage, both of them are seen simultaneously Politeknik APP Jakarta 2022-11-01 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/1002 10.30988/jmil.v6i1.1002 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 177-185 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/1002/pdf Copyright (c) 2022 Muhammad Fariz Dwiki Kurniawan

oai:ojs.pkp.sfu.ca:article/1003 2026-01-17T06:32:10Z JMIL:ART

Business Performance Improvement Model Through Entrepreneurial Skills and Benchmarking Mediated by Innovation Performance of MSMEs in the Culinary Creative Industry Sub-Sector in West Java Province Syahyono, S benchmarking entrepreneurial skills innovation performance business performance MSME sub-sector culinary creative industry This study aimed  to analyze the effect of Entrepreneurship Skills and Benchmarking on the Business Performance of Culinary MSMEs mediated by Innovation Performance. This research is  descriptive-verificative  with survey research,  the approach in this study used a descriptive-quantitative approach. There were 338 observation units (respondents) who filled out the questionnaire. The  sampling technique used was  proportional random. Descriptive analysis and verification analysis were used to process the data. The results of this study showed  that low innovation performance, low entrepreneurial skills and the application of benchmarking were  the causes of low culinary business performance achievements in West Java, . Entrepreneurial competence must  be  improved in order to have a greater impact on innovation performance  that  has an impact on continuous performance improvement. Politeknik APP Jakarta 2022-06-05 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion application/pdf https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/1003 10.30988/jmil.v6i1.1003 Jurnal Manajemen Industri dan Logistik; Vol. 6 No. 1 (2022): 10 original research articles were authored/co-authored by 40 authors from 4 countries (Indonesia, Taiwan, Colombia, and Malaysia); 65-83 2598-5795 2622-528X 10.30988/jmil.v6i1 eng https://jurnal.poltekapp.ac.id/index.php/JMIL/article/view/1003/pdf Copyright (c) 2022 S. Syahyono S. Syahyono 47c265902d3958eb6184ce1407196da5